OrionStang Posted April 18, 2014 Author Report Share Posted April 18, 2014 Box for an HDS210. Gonna try this port configuration as opposed to an L-shape. This is easily removeable bass, the amp, box, and extra battery will come out for track days. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Pro7 Posted April 18, 2014 Report Share Posted April 18, 2014 What are the specs for that? I'm on my phone or else I would put it in torres. I've gotten a blowjob and picked up my iphone behind her back to see what email notification I got from smd before Link to comment Share on other sites More sharing options...
OrionStang Posted April 18, 2014 Author Report Share Posted April 18, 2014 1.18 net tuned to 34.9. Its only 19" of port, so I may go up on that before building. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
boom50cal Posted April 18, 2014 Report Share Posted April 18, 2014 should be plenty of port. ran similar area on my SSD10. If you don't like it, twin 3 inch PVC ports ftw. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
Pro7 Posted April 18, 2014 Report Share Posted April 18, 2014 1.18 net tuned to 34.9. Its only 19" of port, so I may go up on that before building. I dont know how much it matters but I emailed their sales rep and they recommended 24" of port per 10 so you're in the ballpark. He also said 1.5 per but thats probably cuz of the stiff suspension. I've gotten a blowjob and picked up my iphone behind her back to see what email notification I got from smd before Link to comment Share on other sites More sharing options...
OrionStang Posted April 18, 2014 Author Report Share Posted April 18, 2014 should be plenty of port. ran similar area on my SSD10. If you don't like it, twin 3 inch PVC ports ftw. Its just to add some low end to music, should be ok. I bought a 4" PSP kit, but couldn't do a design without a bend or external port. Anyway, I'm shooting for May 3 or 4 for my first real road course race. Ill have 4 25 minute sessions, including one with an instructor (first run). SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
boom50cal Posted April 18, 2014 Report Share Posted April 18, 2014 Hot damn, motor is already put back together? On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
sprkn_ranger Posted April 18, 2014 Report Share Posted April 18, 2014 I've heard their subs like bigger boxes and higher tuning...at least their older stuff before the new line came out. Sould be a nice little addition Ken. Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/ Link to comment Share on other sites More sharing options...
OrionStang Posted April 18, 2014 Author Report Share Posted April 18, 2014 Hot damn, motor is already put back together? Same motor. Its all explained in that thread I made about the engine locking up. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
OrionStang Posted April 20, 2014 Author Report Share Posted April 20, 2014 Got the tally on the new engine. $8409.77. I'm sure a few hundo more will pop up. Good for 600whp on 91, and an extra hundred on race fuel. Block and internals machined, balanced, and blueprinted, heads ported and polished. Crazy cams and tuned long tubes. Some may think i'm crazy, but fuck it. I'm not going to wait until i'm 65 years old to have "the toy i've always wanted." SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.