kingleo Posted June 15, 2012 Report Posted June 15, 2012 I have built a few boxes, but I want to try a kerfed port. I don't have access to a table saw, do if there is a builder in the area that can help me out. That would be great. The box will be for 2 12"RE Audio subs ( picking them up today) then I can give more info. Quote http://www.stevemeadedesigns.com/board/topic/77708-2002-millenia-system-re-build/page__view__findpost__p__1070977__hl__%2Bmazda+%2Bmillenia__fromsearch__1 http://www.stevemeadedesigns.com/board/topic/110130-2000-acura-integra-gs-4-door/page__view__findpost__p__1536749__hl__%2Bmazda+%2Bmillenia__fromsearch__1
zxsonnyxz Posted June 15, 2012 Report Posted June 15, 2012 Do you have a normal circular saw with depth adjustment? You don't need a table saw to kerf. Quote STD Passat Build 151db+STD Omega BuildMitsubishi Colt Build - Alpine|Focal|PeerlessHome Stereo BuildSmall Tang Band build - 4" fullrangeBox for 4 8"My Saab 9000 Build- I'd be very happy if you cared to check out the logs and give feedback!
kingleo Posted June 15, 2012 Author Report Posted June 15, 2012 Do you have a normal circular saw with depth adjustment? You don't need a table saw to kerf. I do actually but I don't have the steady hands for that I don't think. But I guess I could give it a try. Quote http://www.stevemeadedesigns.com/board/topic/77708-2002-millenia-system-re-build/page__view__findpost__p__1070977__hl__%2Bmazda+%2Bmillenia__fromsearch__1 http://www.stevemeadedesigns.com/board/topic/110130-2000-acura-integra-gs-4-door/page__view__findpost__p__1536749__hl__%2Bmazda+%2Bmillenia__fromsearch__1
zxsonnyxz Posted June 15, 2012 Report Posted June 15, 2012 (edited) Just make yourself a guide with a 90* angle at one end. I saw a really good youtube video showing the prosess, I'll se if i can find it. I have done it myself and it really isn't as hard as one might think Edit: Here it is Edited June 15, 2012 by zxsonnyxz Quote STD Passat Build 151db+STD Omega BuildMitsubishi Colt Build - Alpine|Focal|PeerlessHome Stereo BuildSmall Tang Band build - 4" fullrangeBox for 4 8"My Saab 9000 Build- I'd be very happy if you cared to check out the logs and give feedback!
kingleo Posted June 16, 2012 Author Report Posted June 16, 2012 Good info in those vids, but I may still want a pro box builder to do it. Quote http://www.stevemeadedesigns.com/board/topic/77708-2002-millenia-system-re-build/page__view__findpost__p__1070977__hl__%2Bmazda+%2Bmillenia__fromsearch__1 http://www.stevemeadedesigns.com/board/topic/110130-2000-acura-integra-gs-4-door/page__view__findpost__p__1536749__hl__%2Bmazda+%2Bmillenia__fromsearch__1
kingleo Posted June 16, 2012 Author Report Posted June 16, 2012 Does anyone know a good box builder in the Orlando area? Quote http://www.stevemeadedesigns.com/board/topic/77708-2002-millenia-system-re-build/page__view__findpost__p__1070977__hl__%2Bmazda+%2Bmillenia__fromsearch__1 http://www.stevemeadedesigns.com/board/topic/110130-2000-acura-integra-gs-4-door/page__view__findpost__p__1536749__hl__%2Bmazda+%2Bmillenia__fromsearch__1
PowerHouse407 Posted June 30, 2012 Report Posted June 30, 2012 bass heads entertainment Quote 2003 VW Jetta Wagon AA Mayhem 15's Flatline BA2 2 XS D3100's in rear Shuriken BT80 under hood Mike Singer 250A SHCA and KnuKonceptz wire Big 4+ AQ / Dayton pro mids+monsoon tweets My Build : http://www.stevemead...35#entry1989435
ZachG Posted June 30, 2012 Report Posted June 30, 2012 What dos kerfing do? Like what's it used for. I didn't watch the video Quote 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
kingleo Posted June 30, 2012 Author Report Posted June 30, 2012 What dos kerfing do? Like what's it used for. I didn't watch the video It's used for rounding the edges of ports and it looks good. Quote http://www.stevemeadedesigns.com/board/topic/77708-2002-millenia-system-re-build/page__view__findpost__p__1070977__hl__%2Bmazda+%2Bmillenia__fromsearch__1 http://www.stevemeadedesigns.com/board/topic/110130-2000-acura-integra-gs-4-door/page__view__findpost__p__1536749__hl__%2Bmazda+%2Bmillenia__fromsearch__1
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.