First box. No clue what to do

[Ray-ban]

I have decided that i am going to build a box for my 2 RF Punch HX2 10's.

Is anyone here able to give me a design with all the cut measurements? I know its a lot to ask, but when i am filling out information in sub enclosure calculators, i have no idea if my port is too long or too short and whether i have enough cubic feet. My available space is H-11.5 W-36 D-20 in the trunk of a Toyota Camry.

Equipment: (2) RF punch hx2 10"

(1) Hifonics BRZ1200

I want a box tuned around 30-32hz. I listen to a lot of rap and a lot of decaf.

What do i need to glue and seal the box together?

Thaks!

[mttornquist]

Hey I just wrote a tutorial in the last 2 days that is for questions exactly like this.

If you check it out you should be able to get a starting idea.

Thanks!

Here is the link:

http://www.stevemeadedesigns.com/board/topic/145174-ported-box-design-a-tutorial/

[Ray-ban]

Hey I just wrote a tutorial in the last 2 days that is for questions exactly like this.

If you check it out you should be able to get a starting idea.

Thanks!

Here is the link:

http://www.stevemead...ign-a-tutorial/

i seen it but i dont know how to open torres on Mac

[Zapanater]

If torres isn't working use this. It isn't as fancy, but it gets the job done. Just remember, port volume does not count towards box volume.

http://www.the12volt.com/caraudio/boxcalcs.asp#porsq

Remember to input all displacement correctly. Use 3/4 mdf or a comparable material. Try stuff out, it doesn't cost much at all.

[donpablo]

[Joe X]

donpablo check your driver displacement.

[Ray-ban]

Thanks man!

aye i noticed you live in pittsburg, i live in Fairfield on Travis AFB. You build boxes? anyway you think that tuning frequency will be perfect for young jeezy, gorilla zoe type songs? i like those lows that give you migraines

[Joe X]

Here is a suggestion very much like the above:

Enclosure Specifications:

Fb = 32.048 Hz

Vb = 2.125 ft^3

External Height = 11.5 in

External Width = 35 in

External Depth = 17 in

Port Width = 3 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

Front & Back = 35 x 11 1/2

Left & Right Sides = 15 1/2 x 10

Top & Bottom = 35 x 15 1/2

L Port Internal Assembly Parts:

Front to Back = 12 1/2 x 10

Extension = 14 x 10

Assembly guide (generic dimensions):

Let me know any questions.

[donpablo]

I can build a box...good im not sure about and just cause you tune your box that low doesnt mean it will play low your car cabin will take affect on it too

[donpablo]

I was kinda spit balling it on the sub displacement too