john253a Posted June 26, 2012 Report Share Posted June 26, 2012 (edited) http://www.onlinecarstereo.com/CarAudio/p_29596_Kicker_DC124.aspx?utm_source=google_shopping&utm_medium=Product_Feed&utm_campaign=google_shopping_Price_Comparison Was going to go with this. Any objections/better choices in the price range? If you can fit the dual 12" version it's the same price at sonic, if not the the dual 10" is very good and takes up less space, Just what ever you pick don't get something in a prefab unless it's a mainfactorys prefab box Edited June 26, 2012 by john253a Quote Link to comment Share on other sites More sharing options...
Sean Sinha Posted June 26, 2012 Author Report Share Posted June 26, 2012 (edited) http://www.onlinecar...rice_Comparison Was going to go with this. Any objections/better choices in the price range? If you can fit the dual 12" version it's the same price at sonic, if not the the dual 10" is very good and takes up less space, Just what ever you pick don't get something in a prefab unless it's a mainfactorys prefab box My amp is only 4 OHM stable when bridged and Sonic only has the 2 OHM final impedence prefabs, that I saw. Don't want to buy a prefab just to hack it open and rewire it. Can I run two channels to the individual inputs on the sub? IE, two positve and negative going to each terminal? Edited June 26, 2012 by Sean Sinha Quote Alpine CDE-164BT/Rockford Fosgate P400X4 Kicker CS 6.5" Components (Front) Kicker 6.5" Composites (Rear) (Running at -10DB for soundstage) RF P400X1 Monoblock 2x Rockford Punch P1 12" 4 OHM SVC running @ 2 OHM in sealed 1" MDF box. Link to comment Share on other sites More sharing options...
LZTYBRN Posted June 26, 2012 Report Share Posted June 26, 2012 http://www.onlinecar...rice_Comparison Was going to go with this. Any objections/better choices in the price range? If you can fit the dual 12" version it's the same price at sonic, if not the the dual 10" is very good and takes up less space, Just what ever you pick don't get something in a prefab unless it's a mainfactorys prefab box My amp is only 4 OHM stable when bridged and Sonic only has the 2 OHM final impedence prefabs, that I saw. Don't want to buy a prefab just to hack it open and rewire it. Can I run two channels to the individual inputs on the sub? IE, two positve and negative going to each terminal? Yes you can do that. But even so, if those woofers are 2 ohm final impedance, there's no way to get them to 4 ohms final, or even two separate 2 ohm loads (minimum impedance on each channel when not bridged). Are you set on running a prefab...? Quote Link to comment Share on other sites More sharing options...
Felon312 Posted June 26, 2012 Report Share Posted June 26, 2012 i would run a JL Audio 12" Singles 4-Ohm W3V3 Series Subwoofer. They are rated at 500 rms and you can pick them up for about 150$ Quote Link to comment Share on other sites More sharing options...
Joe X Posted June 27, 2012 Report Share Posted June 27, 2012 (edited) Can I run two channels to the individual inputs on the sub? IE, two positve and negative going to each terminal? If not bridging you would have dual 2 ohm outputs. In other words you would need both subs to get their coils wired to two ohms to get the 300W. Bridged any single 4 ohm coil or dual 2 ohm wired in series can do. Edited June 27, 2012 by Joe X Quote Link to comment Share on other sites More sharing options...
AB18VFL Posted June 27, 2012 Report Share Posted June 27, 2012 i would run a JL Audio 12" Singles 4-Ohm W3V3 Series Subwoofer. They are rated at 500 rms and you can pick them up for about 150$ LOL Quote SUBSCRIBE AT YOUTUBE! 18abVFL < CLICK!! 2005 Subaru Impreza My build log. Head unit- Kenwood Excelon KDC-X695 Front doors- Rockford Fosgate 6.5" Prime components Rear doors- Rockford Fosgate 4" Punch coaxials Sub amp- Audiopipe AP18001d Subs- Two American Bass TNT 10"s Box- 2.6 cubes @ 34hz, 36in of port Big 3 & run of Raptor 1/0 to rear powercell TEAM 808 UPSTATE NY. Can it be heard 2 blocks away, thats how i rate systems. Link to comment Share on other sites More sharing options...
john253a Posted June 27, 2012 Report Share Posted June 27, 2012 http://www.onlinecar...rice_Comparison Was going to go with this. Any objections/better choices in the price range? If you can fit the dual 12" version it's the same price at sonic, if not the the dual 10" is very good and takes up less space, Just what ever you pick don't get something in a prefab unless it's a mainfactorys prefab box My amp is only 4 OHM stable when bridged and Sonic only has the 2 OHM final impedence prefabs, that I saw. Don't want to buy a prefab just to hack it open and rewire it. Can I run two channels to the individual inputs on the sub? IE, two positve and negative going to each terminal? Stupid question have you tries ringing them That's what I do I never order on line as I get a better price over the phone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.