Miguels Posted December 3, 2013 Author Report Share Posted December 3, 2013 i wired the xs vcm just to test it since im still waiting on the plug to arrive.. it helped maintain the voltage higher on my head unit and epicenter.. i also figured out why the voltage is much lower on the H/U... the original charge wire that goes to the relay switches is gone.. only thing it has is the cheap 4 gauge wire i did so it can charge the battery and the 4 gauge going to the starter.. from the battery there is a 10 gauge wire going to the relay box.. im going to fix it by getting a fused 4 gauge from alt to relay box and 1/0 wire from alt to battery.. i think i might even run a second 350a alternator where the AC compressor goes.. i want to keep a healthy electrical so i can be cool and run it at .67 ohms my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Kyblack76 Posted December 3, 2013 Report Share Posted December 3, 2013 Battle through it...... good luck bud... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Miguels Posted December 4, 2013 Author Report Share Posted December 4, 2013 looking through the build i see i left a bunch of stuff out.. i already have everything for my air ride suspension.. all i need is to get it installed. i ordered a bolt on 4 link kit and a watts link.. this are things i can do on my own.. still debating if its worth getting the cantilever bars to make it a 6 link.. also means i wont have to weld any brackets to my axle which is a plus but now i have air bag brackets i wont be needing.. here is a pic of the 4 link and watts link i got.. i havent put it together and its still in the box but might get to it later on this is how it will look once its built pics of the parts will be taken later my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted December 6, 2013 Author Report Share Posted December 6, 2013 got a few more goodies this week... my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
boom50cal Posted December 6, 2013 Report Share Posted December 6, 2013 SWEET! always love seeing bagged GMT400's On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
Miguels Posted December 6, 2013 Author Report Share Posted December 6, 2013 SWEET! always love seeing bagged GMT400's it will be going to the shop March-April to get bagged.. right now i want to get all my electrical fixed my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted December 8, 2013 Author Report Share Posted December 8, 2013 i think this is going to be where i mount the VCM my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
COLTON94 Posted December 8, 2013 Report Share Posted December 8, 2013 Looks clean hope u get the etrical issues sorted out Link to comment Share on other sites More sharing options...
Kyblack76 Posted December 8, 2013 Report Share Posted December 8, 2013 yes sir.. on the way. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Miguels Posted December 19, 2013 Author Report Share Posted December 19, 2013 placed the order for the cantilever.. shit just got serious Order Summary Order Information Order Number: 19XXX Date: 12/19/2013 2:42 AM Status: Payment Received Status Description: Shipping Method: UPS Ground Coupon Codes: FRMEMBER Customer Information Customer: Miguel Serrano Email: Ship To Phone: Bill To Miguel SerranoPhone: Additional Information Who Referred You To Our Site?: Automotive Forum Product Information Product Name Item Number Quantity Item Price Total Price 88-98 GM 1500 Series Truck Bolt-On Cantilever CBO-C61 1 $689.00 $689.00 Subtotal: $689.00 Discounts: -$34.45 Shipping: $61.81 Handling: $0.00 Tax: $0.00 Order Total: $716.36 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.