mrdavebasshead75 Posted July 23, 2012 Report Posted July 23, 2012 What is the best way or correct way I should say, to debadge my Bravada without peeling up the paint?? Thanks guys in advance!! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!!
J NASTYFLEXXX Posted July 23, 2012 Report Posted July 23, 2012 i pulled my car in the garage and used a hair dryer and it pealed right off man Quote
DruLoco Posted July 23, 2012 Report Posted July 23, 2012 i used a hair dryer and some fishing line to debadge my jetta Quote Mk4 jetta 2 point slow Kenwood KDC-X496 hifonics HFI-1000d Obsidian 12 in a 2 cube box 34hz some shitty orion 4 channel 2 pairs of infinty components
Socky Posted July 23, 2012 Report Posted July 23, 2012 youll need something to heat the glue up, that way it will be easier to remove, do like the guy above did and try some fishing line. Be slow and careful cant rush it or else to wont remove all the glue. Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
Mtnbikecrazy55 Posted July 23, 2012 Report Posted July 23, 2012 Gasoline works great to get residue off, just don't leave it sit on the paint for a long time. Quote I hate long signatures.... ...what the fuck is wrong wiht you you fucking fuckity fuck fuck head... Mtnbikecrazy55 Feedback
mrdavebasshead75 Posted July 23, 2012 Author Report Posted July 23, 2012 Ok thanks guys, ill try the blow dryer and fishing Line trick!! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!!
mrdavebasshead75 Posted July 23, 2012 Author Report Posted July 23, 2012 Gasoline works great to get residue off, just don't leave it sit on the paint for a long time. What about Goo Gone? Wouldnt that help with the residue? Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!!
DruLoco Posted July 23, 2012 Report Posted July 23, 2012 i was just going to add use some goo gone or soemthing similar to get rid of residue and then wash and wax to make it look pretty Quote Mk4 jetta 2 point slow Kenwood KDC-X496 hifonics HFI-1000d Obsidian 12 in a 2 cube box 34hz some shitty orion 4 channel 2 pairs of infinty components
SGTSKIP Posted July 23, 2012 Report Posted July 23, 2012 FIshingline is too thick. I have used Dental Floss for 20+ yrs. Let the car sit out in the sun and you can slice it right off. Dish detergent will remove the glue without messing up your finish. How old is the car, if its a little older it might be faded where the badges are, and when you take them off it will be a different color under it. Good luck Skip Quote Does this smell funny to you? Its your sister
mrdavebasshead75 Posted July 23, 2012 Author Report Posted July 23, 2012 FIshingline is too thick. I have used Dental Floss for 20+ yrs. Let the car sit out in the sun and you can slice it right off. Dish detergent will remove the glue without messing up your finish. How old is the car, if its a little older it might be faded where the badges are, and when you take them off it will be a different color under it. Good luck Skip Thanks for the info Skip. Its a 2001 Oldsmobile Bravada and ill try floss as well! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.