Sub Box for SAv2

[johnarias15]

Could the measurements for the box be 12x12x14?

[john253a]

I'll have to check when I'm home, but what hz you want will most Likly determin that

[johnarias15]

I was looking around 25-30 hz. I was also if the port opening is smaller does that mean a lower frequency?

[john253a]

you can just fit in with a 3" port\

12w 12h 14d

3" x 30" long port with 3x90deg bends

front to back, left to right, up, then right to left again

you wont be able to use psp ports as there flare is to big, but youll be able to make one with a smaller flare or use it straight

if you 14" is width then you will fit a psp port in

[johnarias15]

so would that be 10" back, 10" right, 10" to the front on the port?

[johnarias15]

This past weekend I did build a box that was 12x12x14 with a port opening of 1.5" The port ran towards the back 9.625" and went to the right 6.25". It did sound awful so I want to get this second one right.

[Joe X]

Could the measurements for the box be 12x12x14?

Better post the maximum dimensions you have that is not enough, not sure where do you intend to place this box, if you can post some pics.

[johnarias15]

what about this?

http://s1098.photobucket.com/albums/g364/johnarias2012/?action=view&current=Untitled.png

Edited August 6, 2012 by johnarias15

[Joe X]

The port is too thin and the port area is low for that sub, the driver displacement is 0.1 cubic feet for the V2 despite what's listed. But you don't have to take my word for that, you can just build it and see how it goes.

[raolito1980]

Hey sorry but this is off topic. But what do you have in the Sierra? Im looking to put in 2 SA 8v2's in my Sierra. But I Im not sure how to measure my space under seat. Sux for me.