mrdavebasshead75 Posted August 13, 2012 Report Share Posted August 13, 2012 (edited) Ok so I said screw the box idea. Been wanting a wall for a LONG time! I have a 2001 Olds Bravada and want to do a C-pillar wall. Have a couple quick questions. 1. I have (2)SA-15's dual 4 and (1) Skar 1500.1. I want to put (2) more 15's for a wall but I would have to get another Skar amp. Would (4) fit back there? 2. If I run just (3) of the SA15's could I get a second Skar 1500.1 and strap them? Would that be too much power? If anyone that has a walled Blazer or Bravada please chime in. I also want to know if I can get a design layed out for me!. I seen a guy on here with (3) 15's in a C-pillar and that was awesome. Want to start this ASAP!! Edited August 13, 2012 by mrdavebasshead75 Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
mrdavebasshead75 Posted August 13, 2012 Author Report Share Posted August 13, 2012 If I need to measure anything please let me know!! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
That1Kid Posted August 13, 2012 Report Share Posted August 13, 2012 Measure the cargo area behind the C-Pillar. Gotta figure out how many cubes you have to work with. Quote -98' Ford Expedition (Rest in Peace) -AVH-P3300BT -Crescendo BC5500 -4 18" DC m2 Level 3. Link to comment Share on other sites More sharing options...
mrd6 Posted August 13, 2012 Report Share Posted August 13, 2012 ^this. Also, c-pillar walls are badass! You should do it, you'll learn alot Quote My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
mrdavebasshead75 Posted August 13, 2012 Author Report Share Posted August 13, 2012 Yeah they are!! Lol.. Im learning as I go. Picked up 4 sheets of 3/4 " MDF today!!! Ill go out and measure and get back with you guys! Thanks!! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
Chris Hammer Posted August 13, 2012 Report Share Posted August 13, 2012 two skar 1500's might be alot for 3-SA15's depends what your final ohm load is. Quote MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot. Link to comment Share on other sites More sharing options...
aerickson Posted August 13, 2012 Report Share Posted August 13, 2012 The power should be fine. Quote Link to comment Share on other sites More sharing options...
BEEMDUB Posted August 13, 2012 Report Share Posted August 13, 2012 (edited) two skar 1500's might be alot for 3-SA15's depends what your final ohm load is. 3000 watts for THREE sa-15's? if he even gets the full 3000 watts strapped like that that still wouldn't be anything they couldn't handle you could put that power on 3 sa-12s and they would take it... Edited August 13, 2012 by BEEMDUB Quote Link to comment Share on other sites More sharing options...
mrdavebasshead75 Posted August 13, 2012 Author Report Share Posted August 13, 2012 two skar 1500's might be alot for 3-SA15's depends what your final ohm load is. 3000 watts for THREE sa-15's? if he even gets the full 3000 watts strapped like that that still wouldn't be anything they couldn't handle you could put that power on 3 sa-12s and they would take it... Awesome! Well I have the dual 4's so if I strap the (2) 1500's to the (3) SA's what would be the final load? Still 1.33 or somewhere?. Im trying to get the correct measurements. I know I need 12-14 cubes at 32hz? Does that sound right? Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
mrd6 Posted August 13, 2012 Report Share Posted August 13, 2012 Yep, you would have a 2.66 total load or 1.33 per amp. At this load you definitely will not have to worry about having too much power for the SAs to handle. Your box specs seem reasonable to me, I would probably tune a bit higher but either way I think youll be happy Quote My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.