That1Kid

9,217

I somewhat remember an issue he was involved in, here. Someone purchased a DC XL from him, and he never shipped it. Could be a different dude, but I'm pretty sure his name was Chris Evans

Appreciate it, Cody. Thanks

Running 4 Level 3 18s w/ Level 4 upgrades on roughly 5k watts. I just want it to play low frequency music violently. How many cubes should I aim for and how much port area? Looking for a low 30s tuning. Thanks

Not enough power, in my opinion. 2 Level 3s would be golden on 2k. I have a BC5500 on 4...they have taken the abuse for several months now.

Dave 43229 Lvl 3 18" w/ lvl 4 upgrade. Need 4

Good chance I'll be grabbing 4 more 18s for the truck.

Simple. This forum.

Mother of God..

There are pics of it compared to a D3100 somewhere.

Yup

Going through the amp. I don't have the harness to plug the RCAs into the dd1 all you do is plug the RCA into the DD-1, you have an aftermarket deck. I dont see why you are doing it through the amp. Ohhh ok. Didn't realize that was how it's done. But either way, I have to go through the amp to set the gain. And it distorts with the gain all the way down on every track at volume 9.

Going through the amp. I don't have the harness to plug the RCAs into the dd1

Ok. Thanks guys. I'm gonna check the deck now. And gonna get a cd

Bump yo

Using AVH-P3300BT (4v preouts) head unit Crescendo BC5500 Knukonceptz karma RCAs (Checked them, they look fine) LC-1 Gain knob My maximum unclipped volume was max (40/40) when we used DD-1 for my last build. Now it shows constant distortion above vole 9. Gain is all the way down. I'm using my flash drive for the DD-1 Tracks. I had to convert them to 320kbps...I know this isn't ideal, but my flash drive wouldn't recognize the original files. Maybe this is part of the reason? Idk.. Or maybe my head unit is screwed? What do you guys think?

Finished almost 2 years of Political Science...realized a Poli-Sci degree is worthless in today's job market...so I'm starting either Electronic Engineering or Mechanical Engineering this semester...I'm basically a freshman all over again. And I haven't taken a math course in almost 2 years...FUUUUUUUUUUUUUUUU!!!!

AudioQue has B-Stock AQ1200s for $201. Unless you're trying to give em more than RMS.

I need one D3100. Ready to pay tonight.

Happy Bday!

You have plenty of space. You could do subs up/port back...if you wanted. I wouldn't wall this setup. Especially being at the C-Pillar. But that's just my opinion. Good luck with whatever you end up doing.

Measure the cargo area behind the C-Pillar. Gotta figure out how many cubes you have to work with.

Just do some research here before you start building/buying. There is a lot to learn man. Go with quality equipment, and do it right the first time. And try to make your posts more understandable. No punctuation and multiple spelling errors make it much more difficult to follow what you are asking/saying.