Stee-Z Posted August 26, 2012 Report Share Posted August 26, 2012 Im currently getting blueprint designs from PWK Designs . but im not sure where i should go for my measurements and what my audible performance should be at so i can submit it. should the performance be around 30-50 hz? this is my first 4th order, and should i include over the wheel wells for my measurements or just build in between them? (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened Link to comment Share on other sites More sharing options...
412 CVX Posted August 26, 2012 Report Share Posted August 26, 2012 From what i hear PWK designs enclosures to be very "flat" not a lot of positive feedback around here. i don't have much input other than that lol. Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
Stee-Z Posted August 26, 2012 Author Report Share Posted August 26, 2012 haha ok..well i dont know any other designers who will design me 4th order haha..any ideas? (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened Link to comment Share on other sites More sharing options...
will77530 Posted August 26, 2012 Report Share Posted August 26, 2012 i thought a flat response was good???? Link to comment Share on other sites More sharing options...
Socky Posted August 26, 2012 Report Share Posted August 26, 2012 From what i hear PWK designs enclosures to be very "flat" not a lot of positive feedback around here. i don't have much input other than that lol. He will. lol Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.