MD7786 Posted September 15, 2012 Report Posted September 15, 2012 I have a capacitor and am taking it out. Do I have to discharge the cap before I unhook or anything??
SnowDrifter Posted September 15, 2012 Report Posted September 15, 2012 Yes. Unhook everything from it and put the supplied resistor or bulb across the pos/neg of the cap and it will discharge over time ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
MD7786 Posted September 15, 2012 Author Report Posted September 15, 2012 What if I don't have a resister. Could I use a test light.
SnowDrifter Posted September 16, 2012 Report Posted September 16, 2012 Yup. Just leave it hooked up until the bulb goes out completely ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Katt Posted September 16, 2012 Report Posted September 16, 2012 Capacitor you say? Be a boss, stick the capacitor between your leg, and short it with a screw driver. No harm done. I've done it no problems, fun to do in front of your pussy friends too LMAO. *06 330i - Sundern x12 - saz-3500* *91 Foxbody V1 S-Trim Notch*
Azagtoth502 Posted September 16, 2012 Report Posted September 16, 2012 discharege with yer penis pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls
Recommended Posts
Archived
This topic is now archived and is closed to further replies.