StreetMetalBen Posted October 10, 2012 Author Report Posted October 10, 2012 I am running a Crappy Old Kenwood. and i can hear the music start to clip on the deck at 29 out of 35. So I never turn it up past 28. Just to be safe. And at full gain, i still never heard the sub clip, and I have had it in multiple box's. Sealed, Ported Sub up port back, cheap pre-fab, and a t-Line trunk wall. But i am still new to this, and am learning alot.
kickass audio Posted October 11, 2012 Report Posted October 11, 2012 I would like to say, That forevrbumpn is a good friend of mine, off the forums. and i believe he owned this sub at one time. But to my knowledge it was not built by him. In either case, i tried contacting him, but he has been out of cell range. He does not build subs anymore, and he sold off all of his stock. I tried multiple times but like i said the emails and communication stopped. Its a lost cause and he told me he was giving up the whole reconing crap and going to appliance repairs. Either way im just pissed that im out of a sub. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress
Recommended Posts
Archived
This topic is now archived and is closed to further replies.