ThreehundredC Posted March 22, 2013 Author Report Share Posted March 22, 2013 i need to rebuild the box to fit over the humps Just like this one but for a single 15 but tuned low tuned than 45hz http://www.ebay.com/itm/Chrysler-300-Kicker-L7-15-Solobaric-Speaker-Box-10-12-15-Custom-Text-Sub-Box-/300600415270 Link to comment Share on other sites More sharing options...
ThreehundredC Posted March 22, 2013 Author Report Share Posted March 22, 2013 somebody please make a cut sheet for this box^ Link to comment Share on other sites More sharing options...
ThreehundredC Posted April 9, 2013 Author Report Share Posted April 9, 2013 ok I NEED A PORT TUNER PLEASE i got my sheet of MDF new blades everything ready just cant get the port right Kicker l715(2011) on kicker 750.1 (2011) my box design is not square so it gets confusing.. its 18 tall in the front 13,5 tall in the back with the top slanted downward , width is 37.5 at the top base/bottom is 31.5 then it has a 3.5 inch step up and 3.5 over on each side im building that box in the sketchup^ can i get some port tuning help please.. Link to comment Share on other sites More sharing options...
ThreehundredC Posted April 9, 2013 Author Report Share Posted April 9, 2013 i want it just like this but port can be any shape or location Link to comment Share on other sites More sharing options...
Joe X Posted April 9, 2013 Report Share Posted April 9, 2013 You are going to have bad airflow around the box if you do that, when you do a box that fits like a glove you better do it port sub(s) front sealed off. Link to comment Share on other sites More sharing options...
ThreehundredC Posted April 9, 2013 Author Report Share Posted April 9, 2013 because of the humps? my box is just a huge square sitting dead center in my trunk can i make it a foot smaller with out losing sound Link to comment Share on other sites More sharing options...
ThreehundredC Posted April 9, 2013 Author Report Share Posted April 9, 2013 gotta be 31.5 wide til it hits the humps like the box is now . and i dont want it past the Hinge where u lift for the spare tire which is about 22 inches from the back of the seat Link to comment Share on other sites More sharing options...
Joe X Posted April 9, 2013 Report Share Posted April 9, 2013 Your box is kind of tall right now but there's good space on the sides to give sound waves a return path, if you take all width and all height then you loose output unless you are firing forward. Or you can use 12s firing backwards. Link to comment Share on other sites More sharing options...
Joe X Posted April 9, 2013 Report Share Posted April 9, 2013 If you have not done so, check this sealed off boxes: http://www.stevemeadedesigns.com/board/topic/166005-noticeable-gain-from-sealing-off/ Link to comment Share on other sites More sharing options...
ThreehundredC Posted April 9, 2013 Author Report Share Posted April 9, 2013 i dont want to fire this one forward if i get a different sub i will do that because my seats stay down but i went out and took a pic of my set up heres with the seats up you have almost a foot of floor space just so you can see what im tryna explain it just barley is to tall as this is my "show car" its not very pretty Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.