2 12 in focus

[focas23]

can I put the subs facing a different way because my rear deck and do u think I should use one or two amps

[focas23]

ill get a pic soon

[alaskanzx5]

for 2 12s i would do port and sub up so that the port has room to breath. i did a box port and subs on the same side and had it rear facing and then turned it up facing and gained a good amount of output. made it sound a lot cleaner, reduced the rattles and sounded deeper. gained a little on the meter to.

[focas23]

JoeX can u make this for two 15s facing back same sub and amp

[focas23]

or anyone give me a scecht like that

[BobbyG2]

He PMed me, he wants two 15" Mofo's on an BAMF 5500. I don't think there's enough space for that. I'm trying to get some more info to see if I can help.

[BobbyG2]

I ended up convincing him to go with two 12's instead of 15's. He wont be able to have much more than a 4cu.ft. enclosure with adequate port area. Power Acoustic recommends 96 sq.in. of port for a pair of 12's (Damn!) But he can't fit that much port without a ridiculously high tuning, or too little airspace. He wants subs and port facing rear. He'll have at least 4" of clearance with an 18" deep enclosure. He also asked if he should go with one of two Power acoustik BAMF 5500s. I told him that one was plenty.

Here's the dimensions I ended up deciding on:

Could someone better than me mock this up in sketchup please?