Jump to content

Recommended Posts

Posted

So most amps are wired to the ACC on your key. My new amps for my new car will be wired to ACC to my key of course; but I also want a switch. So when the car is turned ON, if the switch is in the ON position (where it'll normally rest) the amps will turn on, like they should.

However, if I see a cop or if I want to test part of my system, etc. I want to be able to flip the switch and kill some of the amps.

My questions is ...

Say for example it's 1000 watts RMS.

So 1000 / 12 V is like 80 amps or so.

Where can I find a switch small enough but that is rated for like 80 or 100 amps? I don't want it to melt.

I've only seen these where I work (a solar company) in big DC disconnect form

Thanks guys

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Posted

You do NOT wire a switch on the power wire....

A little switch on the remote wire (10-15 amp handling should be fine) is what you would do.

2015 Honda Civic LX 4dr | 110k miles | Stock

 

1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit

Posted
So most amps are wired to the ACC on your key. My new amps for my new car will be wired to ACC to my key of course; but I also want a switch. So when the car is turned ON, if the switch is in the ON position (where it'll normally rest) the amps will turn on, like they should.

However, if I see a cop or if I want to test part of my system, etc. I want to be able to flip the switch and kill some of the amps.

My questions is ...

Say for example it's 1000 watts RMS.

So 1000 / 12 V is like 80 amps or so.

Where can I find a switch small enough but that is rated for like 80 or 100 amps? I don't want it to melt.

I've only seen these where I work (a solar company) in big DC disconnect form

Thanks guys

use the switch to power the remote turn on wire on/off. not the main amp battery wire. get atleast a 3amp rated 12 volt switch

http://www.stevemeadedesigns.com/board/ind...showtopic=29213 "sleeper build"

(1) DC AUDIO Level4XL 10

(2) PowermasterD2700 batteries

ALL FOR SALE

TEAM DC AUDIO

TEAM DIRTFLOORPOOR

Posted

Ah great! thanks so much guys that cleared it up alot for me .. I'm newb! hahahaa

Okay thank you

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Posted

hha it's okay i apprecaite your help! i might PM you for stickers too heard you were great :)

okay its DC right not A/C

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

  • 2 weeks later...
Posted

looks clean bro!

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 529 Guests (See full list)

×
×
  • Create New...