Jump to content

Possible to do a Hair trick with a single 15?


Recommended Posts

his box would not be the same as yours. it just doesnt work that way my man.

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Link to comment
Share on other sites

his box would not be the same as yours. it just doesnt work that way my man.

Yea your right, I just wanted people in here to know it is possible to get a good hair trick from one 15 in a trunk build....In a regular truck cab it would be easy lol. My build is more about efficiency then anything.....

149.4 Db @ 30Hz Outlaw With One 15" Fi Team Sub, Trunk Build. !!!!!Hair Tricks!!!!!

Check Out The Build Log http://www.stevemead...0-4-and-t400-4/

Watch The Videos http://www.youtube.com/user/jcplaya3

sigpb.jpg

Link to comment
Share on other sites

Me and my friend did one with his Singlw 12 BTL today. its possible

Could you share enclosure details and how much power you were running?

I forget dimensions but it was around 3.7 cu ft. 30 hz. It was in a toyota tacoma with port loading off of door. He had quite a bit of port area too. it was on right at 2k. Wasnt a big one but it was noticeable

2007 Volvo S40 2.4i (no turbo :( )(Soon XS Power D2400) Stock battery for nowRockford Fosgate 4 gaugeAudioque 6.5" Mid Bass (front)Rockford Fosgate T1 Tweets (front)Rockford Fosgate T2 6.5" Mids (rear)Rockford Fosgats T600-4 (Mids and highs)Rockford Fosgate P3001Fi SSD 12" with PSI recone, building box<p>400 watts, 139.3 @ 42 hz , in the kick window open. Build log!!http://www.stevemeadedesigns.com/board/topic/159148-2007-volvo-s40-audio-build-start-to-current-comment/

Link to comment
Share on other sites

I forget dimensions but it was around 3.7 cu ft. 30 hz. It was in a toyota tacoma with port loading off of door. He had quite a bit of port area too. it was on right at 2k. Wasnt a big one but it was noticeable

Yea its easy when your like 2 feet away from the sub in a cab.....try the trunk lol

149.4 Db @ 30Hz Outlaw With One 15" Fi Team Sub, Trunk Build. !!!!!Hair Tricks!!!!!

Check Out The Build Log http://www.stevemead...0-4-and-t400-4/

Watch The Videos http://www.youtube.com/user/jcplaya3

sigpb.jpg

Link to comment
Share on other sites

  • 2 weeks later...

you need to have an atleast 80% deadened and sealed vehicle for just one 15 ,the less cabin area you give your subwoofer(sealed off from trunk),the more potential it has to move air. Once that's done,you can start playing with power,port area,cabin gain & enclosure size. It honestly makes things much easier if you deaden & seal your car first. Then comes trial & error. I can nearly get my 15 nigtshade to move air,maily because of my 18sq inch per cu.ft @ 40hz with a net of 2.2 and port vol near 1cu.ft. aslo a crappy brz1700.

Next build consist of 7 cubes gross ,2 cu.ft of port volume at 30hz,forward firing & a rubi2500. Hopefully I will be able to pull a small trick from my trunk setup

Link to comment
Share on other sites

  • 8 months later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1712 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...