OrzechNJ Posted December 4, 2012 Report Share Posted December 4, 2012 yoiu dont go over 13.3 because you have a honda yea right... Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 4, 2012 Report Share Posted December 4, 2012 ok look up eld mod Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Fosgatefeind Posted December 4, 2012 Author Report Share Posted December 4, 2012 IIRC, those are supposed to charge up to 14.4 then drop off to float 13-13.3V like n8 said. Put the charger on, walk away for 10 minutes, come back and recheck with meter. Are these installed or no? not installed Quote Buildlog: http://www.stevemeadedesigns.com/board/topic/146515-2007-monte-carlo-ls-build-new-plans-with-dc-audio/ TEAM DC AUDIO www.Dcsoundlab.com Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 4, 2012 Report Share Posted December 4, 2012 Check voltage while on the charger Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
OrzechNJ Posted December 4, 2012 Report Share Posted December 4, 2012 ok look up eld mod first i thought that it was a joke lol.. I read lil bit of that topic http://www.stevemeadedesigns.com/board/topic/139844-how-to-eld-bypass-for-honda-civicaccordfit/ too much new vocabulary for me I know what hes talkin about, but my voltage stays between 14-14.2 kinda depends form "car condition"... Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Fosgatefeind Posted December 4, 2012 Author Report Share Posted December 4, 2012 Check voltage while on the charger I did. 12.75 Quote Buildlog: http://www.stevemeadedesigns.com/board/topic/146515-2007-monte-carlo-ls-build-new-plans-with-dc-audio/ TEAM DC AUDIO www.Dcsoundlab.com Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 4, 2012 Report Share Posted December 4, 2012 Its either your charger or a bad cell Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Fosgatefeind Posted December 4, 2012 Author Report Share Posted December 4, 2012 Its either your charger or a bad cell Ya and Matt at xs said its ok if it only charges to 12.75. I kinda want Nathan to chime in. Quote Buildlog: http://www.stevemeadedesigns.com/board/topic/146515-2007-monte-carlo-ls-build-new-plans-with-dc-audio/ TEAM DC AUDIO www.Dcsoundlab.com Link to comment Share on other sites More sharing options...
Nathan @ XSpower Posted December 4, 2012 Report Share Posted December 4, 2012 Your absorption mode may be set on the lower side of acceptable. Leave the batteries hooked up to the charger overnight and see what they do. Check the voltage at the end of 24hrs and then take the batteries off of the charger and check the voltage again after about 12hrs. If it is still low call in to get Return Authorization and we will check it out. Quote Link to comment Share on other sites More sharing options...
Fosgatefeind Posted December 4, 2012 Author Report Share Posted December 4, 2012 Your absorption mode may be set on the lower side of acceptable. Leave the batteries hooked up to the charger overnight and see what they do. Check the voltage at the end of 24hrs and then take the batteries off of the charger and check the voltage again after about 12hrs. If it is still low call in to get Return Authorization and we will check it out. I did tho already with the 3400. It charged to 12.75. And I couldnt figure it out why. So I turned everything off and unplugged it. Went to work and when I got off roughly 8 hours later it dropped to 12.65. How do I change the absorption mode. I need these battery's installed by thursday and I wAnt them topped off nice Quote Buildlog: http://www.stevemeadedesigns.com/board/topic/146515-2007-monte-carlo-ls-build-new-plans-with-dc-audio/ TEAM DC AUDIO www.Dcsoundlab.com Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.