SoundFreakk Posted December 6, 2012 Author Report Share Posted December 6, 2012 I came up with this, let me know what you guys think. That port area seems too low. What do you mean excactly? Tuned to low or..? Ascendant Audio/Rockford Fosgate Car Audio in House Build Link to comment Share on other sites More sharing options...
alaskanzx5 Posted December 6, 2012 Report Share Posted December 6, 2012 post the measurement for the box, then people would be able to give you better more directed advice. and by port area he means the volume of the port look like it is to low. slot ports are recomended between 12-16" per cuft of box. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
skittlesRgood Posted December 6, 2012 Report Share Posted December 6, 2012 I came up with this, let me know what you guys think. ok, first off you dont have any measurements listed for me to look at so I can't say much.What I can say is that your port is WAY too small. and while this isnt exactly a negative, you dont need to double up every wall on a build like this. its ok to do, but you probably wont see any more benefit than you would with a double baffle and maybe one brace. If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
SoundFreakk Posted December 7, 2012 Author Report Share Posted December 7, 2012 post the measurement for the box, then people would be able to give you better more directed advice. and by port area he means the volume of the port look like it is to low. slot ports are recomended between 12-16" per cuft of box. I used torres calculator for the port length, width and height. Didn't know how to calcute it otherwise because there where no thiele/small parameters for those subs. Here with the measurements.(everyting in mm) Port: Length: 140mm Width: 180mm Heigth: 60mm Ascendant Audio/Rockford Fosgate Car Audio in House Build Link to comment Share on other sites More sharing options...
SoundFreakk Posted February 27, 2013 Author Report Share Posted February 27, 2013 Ok guys kicking this back to life lol. I looked little more into it and gonna do the first enclosure again and then go on with the others that some people asked me to do. so bare with me hope I get the first 1 up today Ascendant Audio/Rockford Fosgate Car Audio in House Build Link to comment Share on other sites More sharing options...
bdog Posted February 27, 2013 Report Share Posted February 27, 2013 when your using the calculator keep the port area per cf between 12" and 15" REP Link to comment Share on other sites More sharing options...
SoundFreakk Posted February 27, 2013 Author Report Share Posted February 27, 2013 Yeah I know, Trey_Dog helped me figuring torres out just did a new one here the screenshots Ascendant Audio/Rockford Fosgate Car Audio in House Build Link to comment Share on other sites More sharing options...
bdog Posted February 27, 2013 Report Share Posted February 27, 2013 thats better but look now your port is too close to the rear of the box you will have to make it bend up REP Link to comment Share on other sites More sharing options...
SoundFreakk Posted February 27, 2013 Author Report Share Posted February 27, 2013 4 inch between back and port is to little? fock I now I remeber lol should be atleast 4.5 inch between it right? Ascendant Audio/Rockford Fosgate Car Audio in House Build Link to comment Share on other sites More sharing options...
bdog Posted February 27, 2013 Report Share Posted February 27, 2013 or a little more to make sure it dosnt chock the port the port always has to be farther away than the smallest width or hight REP Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.