Jump to content
Sundown Audio

Recommended Posts

Posted (edited)

Hey guys, I'm looking to upgrade from 2 rockford fosgate punch p1s, and a "1200w Sony amp" to something better.

I was thinking about 1 sa12, ported. But i was told i dont have enough depth.. 6-8inchs. and that would be on the passenger side.

So i plan on getting 2 sd2-12s [D4 model] - from sundownonly.com

http://www.sundownon...-sd2-12-dual-4/

and run them off of this amp @ 4ohm or 2? :twirl:

http://audioque.com/...ifier_p_30.html

My lights dim a little with the shitty set-up i have now so i also want to get a big 3 kit. i was looking at this one:

http://www.ceautoele...m/big3kits.html

I drive a 2000 s10 xtreme, single cab. So i dont have any room at all. Its a daily driver (mostly night since i work the graveyard shift at UPS)

i'm not looking at numbers or anything.. i just want something that sounds good and hits hard.

Is there any other good amps around my price range of 250-300$ ??

Ive been working my ass off so i can get some good equipment. so let me kno what you all think!

Thanks

Edited by DTA HONDA
  • Like (+1 Rep) 1

2012 Ram 3500. HTT 2nd Gen manifold Swap, HTT s465 Turbo, FASS 150, 6" S&B Intake, 5" TBE, RaceMe programmer, 8 inch tip (dumped over axle) 20x12s on 35s, 6 inch lift, Color match & haloed headlights, 30" lightbar flush mounted in bumper.

2 Sundown audio SD-2 12s and a Soundqubed Q1-1200d amp.

2000 s10 xtreme *SOLD*

1zh2yaf-1.png

Posted

Run those subs at 1 ohm. That amp will be perfect for those

2004 Escalade Ext

Pioneer avh8400

Kicker ix500.4

Kicker ix1000.1

Kicker hyperflex 0+4 awg

Sundown X-15

Sundown Sa-6.5c x2

KnuKonceptz 4 channel Rca

Rockford Fosgate 2 channel Rca

SkyHighCarAudio 14awg speaker wire

Build Log

Posted

with your lack of space if you want to go ported you might oughta do a couple e8v3's. you have enough depth for them as they're less than 5" deep, and you would probably have more output with them ported rather than the 2 sd-12's sealed.

  • Like (+1 Rep) 1

c'mon now, if i was shooting an 8 year old, it wouldnt be MY 8 year old.

i recently got a Pyle PL1590BL and i was building an enclosure for it tuned to 25 hz. i didn't have any tools to cut a circle so i hit it with a big hammer.

2003 Infiniti G35 Sport Sedan

Build in Progress

Posted

with your lack of space if you want to go ported you might oughta do a couple e8v3's. you have enough depth for them as they're less than 5" deep, and you would probably have more output with them ported rather than the 2 sd-12's sealed.

x2 I got a single E8 v3 and its awesome!!

  • Like (+1 Rep) 1

Car:
- 2013 Honda Accord Sport 6MT

- aFe SRI

Electrical:

- Big 3 w/ Execution Audio 0/1 AWG OFC
- Stock Battery

Audio:

- JBL Power Series 6.5 Comps up front (Running off HU power atm)

- JBL Power Series 2-Ways in the rear deck (Running off HU power atm)

Subwoofer:

- Sundown Audio X-15
- CT Sounds AT1400.1D (@1 ohm)

Bedroom:

- Yamaha RX-V365

- Pair of Klipsch KG4.2's

- 2 E8v3's in a 1.34ft^3 tuned to 30hz
- No Amp yet..

- CoolMax ZU900B PSU for amp

In my room & previous car:
- Amp: Soundstream TX1.1300D @ 4 ohms (520 watts)
- T-Line Enclosure tuned to 32hz
YouTube : http://www.youtube.c...r8?feature=mhee

Posted

4 8ev3's on a saz 1200 will be loud in that truck. A set of the 6.5cs on a 125.4 running active. The big 3 kit from audio Technix along with 4ga and 8 ga kits ofc of course and a 270a alt would diffently do the trick.

1 pr Sundown Audio Sa Cs 6.5 component set

1 Sundown Audio sax 125.4

4 Sundown Audio sa8v2's

2 1500's strapped to 2ohms

1 Tenney 270 alt

Posted

Run those subs at 1 ohm. That amp will be perfect for those

Would they be able to run @ 1200 watts?

I guess i cant run them at 2 ohm, since the amp i got is a mono block.. which would've be 870

2012 Ram 3500. HTT 2nd Gen manifold Swap, HTT s465 Turbo, FASS 150, 6" S&B Intake, 5" TBE, RaceMe programmer, 8 inch tip (dumped over axle) 20x12s on 35s, 6 inch lift, Color match & haloed headlights, 30" lightbar flush mounted in bumper.

2 Sundown audio SD-2 12s and a Soundqubed Q1-1200d amp.

2000 s10 xtreme *SOLD*

1zh2yaf-1.png

Posted

With clean signal I think they can. Make sure your gains are set correctly

2004 Escalade Ext

Pioneer avh8400

Kicker ix500.4

Kicker ix1000.1

Kicker hyperflex 0+4 awg

Sundown X-15

Sundown Sa-6.5c x2

KnuKonceptz 4 channel Rca

Rockford Fosgate 2 channel Rca

SkyHighCarAudio 14awg speaker wire

Build Log

Posted

With clean signal I think they can. Make sure your gains are set correctly

i'm getting a dd-1, so they would be.

2012 Ram 3500. HTT 2nd Gen manifold Swap, HTT s465 Turbo, FASS 150, 6" S&B Intake, 5" TBE, RaceMe programmer, 8 inch tip (dumped over axle) 20x12s on 35s, 6 inch lift, Color match & haloed headlights, 30" lightbar flush mounted in bumper.

2 Sundown audio SD-2 12s and a Soundqubed Q1-1200d amp.

2000 s10 xtreme *SOLD*

1zh2yaf-1.png

  • 3 weeks later...
Posted

I'm planning a rebuild to I'm thinking of 2 sd-2 10d4 in 2 seal boxes or 1 sd-2 12d2 or d4 it depends if the 12 can handle 750rms in a ported box the amp is the rf t1000bd

02 dodge ram 1500 reg cab 3rd gen

2 sundown sd-2 d4

soundstream rub1.2500 amp

all sky high car audio-fuse,fuse holder,wire,ring lugs and rca

flex tech

box design by Joe X

supension-mcgaughys 2in drop spindal ,western chassis 6in flip kit,buddy custom c-notch

04 5.7l hemi motor swap and made it an slt eletric everthing

youtube channel-http://www.youtube.c...43?feature=mhee

http://www.stevemeadedesigns.com/board/topic/190882-02-dodge-ram-1500-3rd-gen/

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...