ALPINE408 Posted January 31, 2013 Report Posted January 31, 2013 I bet its a pinched wire, overpowerinng, clipped songs, ect, short answer USER ERROR Just let me know how much it is to shit to cali gots thhe money waiiting for the amp that is just "going out" Have you ever had your woofers blown?
One Way Posted February 1, 2013 Author Report Posted February 1, 2013 Well looks like alpine was right, I carefully checked the wires and one of them leading to the tweeter had a tear in the insulation. Is that what could cause the whole mess? I don't think it was touching bare metal but it is ripped. T-line build- http://www.stevemead...e-t-line-build/
8ight Posted February 1, 2013 Report Posted February 1, 2013 Did you fix it and remedy the issue? I'm gonna hate
One Way Posted February 1, 2013 Author Report Posted February 1, 2013 Not yet ima buy some liquid electrical tape And try it in the morning. I'm a lil busy now. Sorry I came off like a dick dude, weren't my intentions. T-line build- http://www.stevemead...e-t-line-build/
One Way Posted February 1, 2013 Author Report Posted February 1, 2013 highly doubt that fixes your issue Why do u say that T-line build- http://www.stevemead...e-t-line-build/
AI James Posted February 1, 2013 Report Posted February 1, 2013 hold the wire away from everything turn it up, bet it still happens.
One Way Posted February 1, 2013 Author Report Posted February 1, 2013 If it does is my amp toast? T-line build- http://www.stevemead...e-t-line-build/
odsound Posted February 1, 2013 Report Posted February 1, 2013 remove the speaker wires from each channel one by one remove one set of wires turn it up for a bit if it turns off put back the set of wires and try taking off another set of speaker wires till your amp stays on....another thing to try if you got a dmm put the positive lead on the 12v side and the negative lead on each speaker wire thats a quick way of finding a speaker wire that is pinched if one wire is pinched your dmm should show 12v vehicle-02 toyota celicawoofers-groundshaker g-s1 10" woofersamp-SUNDOWNAUDIO SAZ 3500battery-1 C&D battery
One Way Posted February 1, 2013 Author Report Posted February 1, 2013 remove the speaker wires from each channel one by one remove one set of wires turn it up for a bit if it turns off put back the set of wires and try taking off another set of speaker wires till your amp stays on....another thing to try if you got a dmm put the positive lead on the 12v side and the negative lead on each speaker wire thats a quick way of finding a speaker wire that is pinched if one wire is pinched your dmm should show 12v That won't mess anything up? Never heard of that T-line build- http://www.stevemead...e-t-line-build/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.