SnowDrifter Posted February 1, 2013 Report Posted February 1, 2013 noob. All these questions your asking have a category, look around bro.Ouch Mr. 144...Says Mr 915. Haha I kid I kid.OP, you want to know how to wire your subs? Since you have 2 Dual 1.4 subs, you can wire series/parallel for a final load of 1.4 ohms, or .35(not suggested) in parallel/parallel. He has 2 amps. Provided he he has the electrical to run around 3k, since I'm assuming that's what he wants to do, and the amps are rated at 1 ohm not 2, he should be fine wiring to .7 per ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
CleanSierra Posted February 1, 2013 Report Posted February 1, 2013 noob. All these questions your asking have a category, look around bro.Ouch Mr. 144...Says Mr 915. Haha I kid I kid.OP, you want to know how to wire your subs? Since you have 2 Dual 1.4 subs, you can wire series/parallel for a final load of 1.4 ohms, or .35(not suggested) in parallel/parallel. He has 2 amps. Provided he he has the electrical to run around 3k, since I'm assuming that's what he wants to do, and the amps are rated at 1 ohm not 2, he should be fine wiring to .7 perReading>me. Sorry for the bad advice, I didn't realize two amps were being used. I agree with Drifter on this, each sub wired at .7 ohms, assuming you have the electrical. Im not the one you want to try to troll. Just a fyi for you.
mmiller89 Posted February 1, 2013 Author Report Posted February 1, 2013 Sorry I am new to the site just need some friendly advice I have no budget this is my new project I have always been a DIY guy so any info will help I have a 2005 ford explorer all stock electrical and willing to upgrade anything and once I start building I will definitely post pics I have done some very basic installing headunits door spkrs small stuff looking to do more the juggs I have I think will be perfect for what I am doing I just wanna make sure my electrical is up to what I need and my wiring is right where I'm from not to many places to go for professional help all over priced a-holes thanks to anyone trying to help me its much appreciated
mmiller89 Posted February 1, 2013 Author Report Posted February 1, 2013 Also I dont have to use 2 amps I just got those with the juggs they r a lil under powered if u ask me juggs are rated at 2000 rms a pc for a 15 and I have 2 subs so maybe one bigger amp or should I stick with the 2
mttornquist Posted February 1, 2013 Report Posted February 1, 2013 Have you met my friend punctuation? My Build Log: http://www.stevemead...lmost-complete/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.