obsidianbasshead Posted February 5, 2013 Report Posted February 5, 2013 i plan on running a skar 4500.1 on 3 zvx15d2 at 1.3 ohms, 2 skar 85.4's each at a 2 ohm load per channel. my charging system will consist of a xs power d4700 under the hood ( only one that will fit in my 2001 Mitsubishi Eclipse gt ), and 2 xs power xp3000 in the back. wiring will be audiotechnix 1/0 2 runs of power and 2 runs of neg up to the front battery. ill be running a tenney 220 amp alt. ill have the big three done and more cause ill be grounding to the engine block, to the frame and to the alt. ill have all tool maker battery terminals and fuse blocks. duel inputs on both sets of power/grounds on the 4500. will my charging system be ok to support this setup?
Swordlordboy1234 Posted February 5, 2013 Report Posted February 5, 2013 I'd like to see more batteries. My Tenney 200 amp and 2 (non Xs) AGM group 24's and I drop to 13.1-13.5 depending on the note and the temp outside My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect?
obsidianbasshead Posted February 5, 2013 Author Report Posted February 5, 2013 hey how much area did the 50+ sq ft of that audio technix 60 cover. im getting 80 sq ft and im hoping itll be enough for my eclipse. plan on doing as much inside the car as possible.
Swordlordboy1234 Posted February 5, 2013 Report Posted February 5, 2013 I ordered 50sq feet but I got a feeling he went slightly over (Colman is the man) I did 3 layers in my front doors... 1 layer in my rear doors. 2 layers on my trunk lid... 1 layer on my roof..... And the rest cut up to cover up all the holes and stuff on my rear deck. I'm thinking about getting some more maybe 30 sq feet and doing 1 more layer on my trunk lid... And 1 more layer in each door. I'd do another layer in the roof too but let's just say I don't wanna deal with the headliner again My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect?
obsidianbasshead Posted February 5, 2013 Author Report Posted February 5, 2013 yeah ive heard good things about coleman. hope i have as good of a transaction with him as everyone else i hear talking about him. this is going to be such a slow build tho itll be a few weeks before i find out
I.V Posted February 5, 2013 Report Posted February 5, 2013 you should be fine but one more xp3000 on the back would be better 06 Trailblazer ss2 Team shok industries tsx 18sPhoenix Gold ''THE ONE''2 Phoenix gold 800.44 crescendo mp6.2 crescendo mp8bass processor Dc power 270xp 150ft 1/0 ofc sky high cable1 juicebox lithium 0.5kwh 14v/40ahkenwood dnx8120BCAE1.com YouTube channel : REaudioxxx1build log: http://www.stevemeadedesigns.com/board/topic/160106-trailblazer-ss-xxx/
obsidianbasshead Posted February 5, 2013 Author Report Posted February 5, 2013 so three xp3000s in the back? dang didnt wanna hear that lol it takes power to make power but damn it it takes money to make power too lol already looking at over $2000 in charging stuff.
hondakid1996 Posted February 5, 2013 Report Posted February 5, 2013 Why not just see how only 2 xp3000's do, and it you're dropping too low for your liking you know you'll need another.
obsidianbasshead Posted February 5, 2013 Author Report Posted February 5, 2013 yeah thats what ill do for now. the wife is already wanting to have my head examined cause of how much money im spending. she thinks im going through some sorta mid life crisis. lol
TheNewbie Posted February 5, 2013 Report Posted February 5, 2013 yeah thats what ill do for now. the wife is already wanting to have my head examined cause of how much money im spending. she thinks im going through some sorta mid life crisis. lol I take it your going to take out your back seats? Link me the build when you start, love to see other eclipse builds. Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.