scooter99 Posted February 15, 2013 Report Share Posted February 15, 2013 You're quite welcome, glad I could help with some suggestions. Let me know if you have anymore and I'll be happy to give my opinions and suggestions. I'm always on a budget so I try to find ways to do things on the cheap, not off quality but just inexpensive, if I can. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 15, 2013 Author Report Share Posted February 15, 2013 This is legit, keep it up!Appreciate it bro. All the thumbs up makes it all worth while. I was starting to think I had a complete shit build. I'm sure I didn't do everything awesome an I'm sue my next build ill improve on a lot that I've learned while doing this one.... But I'm not unhappy with how it turned out at all. Especially since everything except the box itself is all mine. Feels good to work on something so long and look back and say....That was all my work. And then just enjoy it You have to start somewhere and you've done a hell of a job. Shit you have flex and it sounds amazing. I want mine to flex but don't know if I could do it with my money restrictions. I'll be following this all the way, man. Also, Hondas FTW!BATTLE OF THE FLEX! Do I want it to have something to video or do I deaden it more to hear the bass louder....Q fI guess I know the answer.... Like I said before.. 50 sq feet of 60 mil, foam, in the whole car, and deflex pads in the front doors to try to get rid of back waves..... And I just ordered 40 more feet of deadener?It's one of those hard decisions. I flex a lot less at least my trunk lid and roof after all that deadener in comparison to my "accord full tilt" video... I've tried to go crazy deadening with out ruining my car . We shall see if I will ever beat all rattles. Unlikely. But I'm tryingI actually just deadned my car and it has made a load of difference. I haven't ever gotten flex on my car since I'm not running near the power of you, but I do have them damn rattles. I need to foam some of my car still. If you get the chance check out my build. Will do bro..... Suggestion when foaming...... CAUTION! Lol..... I foamed my trunk lid shut doing it because I was learning and my dad (mechanic) praticAlly fell on the floor laughing at me when it happened.... I had to take out my whole back seat... Both the rear support bars... The rear deck... My heavy ass box,... Climb in the trunk and unbolt the trunk latch.... Fix the trunk latch and remove some of the foam hindering it..l and re assemble... 7 hours later my trunk has zero problems and doesn't rattle as bad... # lessonlearned My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 15, 2013 Author Report Share Posted February 15, 2013 You're quite welcome, glad I could help with some suggestions. Let me know if you have anymore and I'll be happy to give my opinions and suggestions. I'm always on a budget so I try to find ways to do things on the cheap, not off quality but just inexpensive, if I can. At least I'm not the only one trying to do a "quality" build on half budget lol. Believe me... If it was no budget in mind... I'd have my car living over at BassHeadsEnt HQ like maliboom did and have some ridiculous build in it. 8 ZVX 12?! Lol... But until then. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Joshex Posted February 19, 2013 Report Share Posted February 19, 2013 This is legit, keep it up!Appreciate it bro. All the thumbs up makes it all worth while. I was starting to think I had a complete shit build. I'm sure I didn't do everything awesome an I'm sue my next build ill improve on a lot that I've learned while doing this one.... But I'm not unhappy with how it turned out at all. Especially since everything except the box itself is all mine. Feels good to work on something so long and look back and say....That was all my work. And then just enjoy it You have to start somewhere and you've done a hell of a job. Shit you have flex and it sounds amazing. I want mine to flex but don't know if I could do it with my money restrictions. I'll be following this all the way, man. Also, Hondas FTW!BATTLE OF THE FLEX! Do I want it to have something to video or do I deaden it more to hear the bass louder....Q fI guess I know the answer.... Like I said before.. 50 sq feet of 60 mil, foam, in the whole car, and deflex pads in the front doors to try to get rid of back waves..... And I just ordered 40 more feet of deadener?It's one of those hard decisions. I flex a lot less at least my trunk lid and roof after all that deadener in comparison to my "accord full tilt" video... I've tried to go crazy deadening with out ruining my car . We shall see if I will ever beat all rattles. Unlikely. But I'm tryingI actually just deadned my car and it has made a load of difference. I haven't ever gotten flex on my car since I'm not running near the power of you, but I do have them damn rattles. I need to foam some of my car still. If you get the chance check out my build.Will do bro..... Suggestion when foaming...... CAUTION! Lol..... I foamed my trunk lid shut doing it because I was learning and my dad (mechanic) praticAlly fell on the floor laughing at me when it happened.... I had to take out my whole back seat... Both the rear support bars... The rear deck... My heavy ass box,... Climb in the trunk and unbolt the trunk latch.... Fix the trunk latch and remove some of the foam hindering it..l and re assemble... 7 hours later my trunk has zero problems and doesn't rattle as bad... # lessonlearned I'll be sure to keep that in mind. I was going to do it and leave everything open since it expands. I've heard of people doing this and pushing out their rear quaters ahahahaha 95 Acura Integra - 5-speedNFG Pioneer FH-X700BT(2) Rockford Fosgate 12" P3AQ1200dRockford Fosgate P1652-S 6.5" components Rockford Fosgate P1572 5x7"Rockford Fosgate R400.4 95 Integra Build Here93 EJ2 Build Here Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 19, 2013 Author Report Share Posted February 19, 2013 Luckly I didn't "push out" any panels I was by careful about that. But next time I'd be more careful of moving parts My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 25, 2013 Author Report Share Posted February 25, 2013 Got lots of packages this week. Who wants to see pics? more packages still coming aswell. One is 20 lbs My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Joshex Posted February 25, 2013 Report Share Posted February 25, 2013 Lets see them! 95 Acura Integra - 5-speedNFG Pioneer FH-X700BT(2) Rockford Fosgate 12" P3AQ1200dRockford Fosgate P1652-S 6.5" components Rockford Fosgate P1572 5x7"Rockford Fosgate R400.4 95 Integra Build Here93 EJ2 Build Here Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 26, 2013 Author Report Share Posted February 26, 2013 here is a video I took today. Ill embed later...along with a few pics updates My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
perryrc14 Posted February 26, 2013 Report Share Posted February 26, 2013 sweet build! your requirements are exactly the same as mine besides just impressing your aunt lol. Link to comment Share on other sites More sharing options...
Bump4life Posted February 26, 2013 Report Share Posted February 26, 2013 looking good man!! i cant believe this is first time ive seen your log. nice highs. who reccommended those? like them still? Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.