CJSmith Posted March 1, 2013 Report Share Posted March 1, 2013 I thought you wernt going to argue on the internet anymore? Stating a fact isn't arguing. *Rebuid in progress* Link to comment Share on other sites More sharing options...
WillPwn4Food Posted March 1, 2013 Report Share Posted March 1, 2013 inb4lock. In all honesty, if your stereo starts to distort, you're clipping. If you smell it starting to burn or it gets excessively hot, you're either clipping, sending too much power to it, or your box is inefficient. Best thing to do is bring it to your local stereo shop and have them properly set your gains if you can't figure it out yourself. The only RIGHT way is with a dmm at the very least.There's a couple topics on here how to properly set your gains. Do some research and read up. I don't see this topic really going anywhere except into a steaming pile of shit. Everyone's getting all angry and butt hurt and really not helping anyone. Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus. Link to comment Share on other sites More sharing options...
08tahoe Posted March 1, 2013 Report Share Posted March 1, 2013 Link to comment Share on other sites More sharing options...
soundstream15 Posted March 1, 2013 Report Share Posted March 1, 2013 This is gonna get locked. What I meant by dirty songs is like Gucci mane-swing my door. Songs like that, that are clipped. Square sin wave. Even tho you have a clean single a square wave form can cause clipping. Your cd is fine and I'm sure it's clean bc they are bass heads:) find someone to set your gains correctly. Maybe playing well below tuning?? More information on your box would be helpful Link to comment Share on other sites More sharing options...
purplesyrup Posted March 1, 2013 Report Share Posted March 1, 2013 it could be many things but sounds like clipping to me Your 10w7 is at so much more of a level than a kicker cvr, you are likely clipping your JLw7 also and its just taking it because its built with much higher quality parts Link to comment Share on other sites More sharing options...
TrunkMuzik Posted March 1, 2013 Author Report Share Posted March 1, 2013 002 by 2010MS3Racer, on Flickr dont have the specs on the box. but i know it is to small Without music, life would be an error Link to comment Share on other sites More sharing options...
TrunkMuzik Posted March 1, 2013 Author Report Share Posted March 1, 2013 it could be many things but sounds like clipping to me Your 10w7 is at so much more of a level than a kicker cvr, you are likely clipping your JLw7 also and its just taking it because its built with much higher quality parts that makes sense Without music, life would be an error Link to comment Share on other sites More sharing options...
T.A.G. Audio Posted March 1, 2013 Report Share Posted March 1, 2013 Man you will be good to go if you just have someone set your gains. Just look up a tutorial from a credible source to do so if you want to try and do it yourself. Go out there take a look at put the subsonic at about half and put the gain at like 1/2 to 3/4 until you have time to get it looked at. Just to be safe you may want to stay closer the the half way on the gain. And the reason I say half on the subsonic is because that box is probably tuned pretty high. 03 Ford f150 2 Sa8 v2s Ap 1800d... Stinger 0 Guage CA Auto/ Electric Big 3 Xs power d680 in parallel with new group 65 stocker Soon to come another d680 Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back Soon to come Pioneers all around Focal Solid 4 Speaker Amp Kenwood KDC-X896 Memphis Line Driver My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/ Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee Link to comment Share on other sites More sharing options...
alaskanzx5 Posted March 1, 2013 Report Share Posted March 1, 2013 Man you will be good to go if you just have someone set your gains. Just look up a tutorial from a credible source to do so if you want to try and do it yourself. Go out there take a look at put the subsonic at about half and put the gain at like 1/2 to 3/4 until you have time to get it looked at. Just to be safe you may want to stay closer the the half way on the gain. And the reason I say half on the subsonic is because that box is probably tuned pretty high. congrats, you just told him to set his gains blind. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
T.A.G. Audio Posted March 1, 2013 Report Share Posted March 1, 2013 no i am saying to turn it down until he has time to get it looked at that there is no clipping... Or just don't listen to it at all. You risk damaging your equipment more. 03 Ford f150 2 Sa8 v2s Ap 1800d... Stinger 0 Guage CA Auto/ Electric Big 3 Xs power d680 in parallel with new group 65 stocker Soon to come another d680 Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back Soon to come Pioneers all around Focal Solid 4 Speaker Amp Kenwood KDC-X896 Memphis Line Driver My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/ Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.