bigger box question

[Ryan929]

Alright thanks man

[Joe X]

So here is the suggestion, it would be best if you made a drawing to get familiar with the cutsheet specs, 4" PVC pipe for the ports:

Enclosure Specifications:

Fb = 33 Hz
Vb = 4 ft^3

External Height = 24 in
External Width = 50 in
External Depth = 12 in 76 deg.
External Depth2 = 6 in 76 deg.

Cut Sheet List:

* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

Front = 24 3/4 x 50

Top = 4 1/2 , 4 11/16 x 50

Bottom = 10 1/2 , 10 5/16 x 50

Back = 24 x 50

Left & Right Sides =
Top = 4 11/16
Bottom = 10 5/16
Back = 22 1/2
Front = 23 3/16

Port Quantity and Dimensions:

Number of Ports = 3
Pipe Port Diameter = 4
Pipe Port Length = 20 1/4
External Length = 3 1/4

Assembly guide (generic dimensions):

[Ryan929]

If i put the dimensions into the torres the cut sheet will be the same right? Its easier for me to look at and understand

Also where exactly do i place the ports and how far from one another, and what is the bracing on the inside of the box?

[Joe X]

The Torres cutsheet have a different assembly style and actually requires you to calculate your cuts so in addition to do a drawing you will have to determine your cuts sizes and angles yourself, it's maybe no big deal either way but I have already specified them so I think that's easier.

The distance between pipes side to side can be 1 1/2", the round braces can be 1 1/4" wooden dowel rods, the lower brace is just MDF cut to fit. The center of the cutout for the subs is 7 11/16" from the bottom end of the sheet.

Let me know if you have any more questions.

[Ryan929]

Thanks you have haelped a lot so far im about to start cutting. Where do i place the piece of mdf that is inside the box?

[Ryan929]

also why does this say two measurements for the top: Top = 4 1/2 , 4 11/16 x 50

The 4 1/2 and the 4 11/16

[Ryan929]

Also how far away from the edge to i place the first port all the way to the right

[stroupe79]

2 SA 12s in a ported box on about 2kw will be greatly improved by running a ported box, it will be in your best interest to do that instead of the sealed box....

[Ryan929]

2 SA 12s in a ported box on about 2kw will be greatly improved by running a ported box, it will be in your best interest to do that instead of the sealed box....

Haha i sure hope so as long as i do it all right lol

[CleanSierra]

How do you think you are getting 6" top depth and 12" top depth in an S-10? Those are crazy numbers! At 24 for box height with 6" depth and 12" on the bottom, you are gonna be eating the dash every time you drive. Have I missed something? Is this possibly not for the S-10? And PLUS you are gonna add more depth for the spacing required to give the sub some breathing room? Where is this room coming from....