SlamminBeats Posted March 25, 2013 Report Posted March 25, 2013 i say not worth it. figure out your cuts for the box, get it cut at the lumber yard. You have to be able to get a hold of a drill, screws and wood glue to build the box. You will save soo much money man.
Ryan929 Posted March 25, 2013 Author Report Posted March 25, 2013 I agree with you on that but i dont know how to tune it or anything either..
SlamminBeats Posted March 25, 2013 Report Posted March 25, 2013 I agree with you on that but i dont know how to tune it or anything either.. use the torres box calculator on this website
Ryan929 Posted March 25, 2013 Author Report Posted March 25, 2013 Where at i just looked and searched it with no luck.
Joe X Posted March 25, 2013 Report Posted March 25, 2013 I agree with you on that but i dont know how to tune it or anything either.. Post max dims for a box, exact amp, subs and vehicle models and type of music you listen.
SlamminBeats Posted March 25, 2013 Report Posted March 25, 2013 http://www.stevemeadedesigns.com/board/topic/38791-torres-box-tuning-calculator-updated-818/ any more questions feel free to ask download link is somewhere on the first page i believe
Ryan929 Posted March 25, 2013 Author Report Posted March 25, 2013 2000 Chevy s10 single cab 2 SA-12s Hifonics bxi2010d (2k rms at 1ohm) And mostly just rap Height- 24 inches Top depth- 5 inches Bottom depth-11 inches Width 53 inches And id like to have it tuned around 33hz
Joe X Posted March 25, 2013 Report Posted March 25, 2013 2000 Chevy s10 single cab 2 SA-12s Hifonics bxi2010d (2k rms at 1ohm) And mostly just rap Height- 24 inches Top depth- 5 inches Bottom depth-11 inches Width 53 inches And id like to have it tuned around 33hz Hope you find some more space, if not here is a possible "way" to do it BUT the follwing it's not ready to build yet: All necessary bracing is not shown: See if you can increase a bit your max dims.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.