BassMunky Posted March 27, 2013 Author Report Posted March 27, 2013 something like this Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
k3n12ock Posted March 27, 2013 Report Posted March 27, 2013 Cone area x power = hairtrick like that. 05 xB - (2) EVIL 18s - (2) BC3500s - NO WALL Channel 1: http://www.youtube.com/k3n12ock Channel 2: http://www.youtube.com/MrK3n12ock2
BassMunky Posted March 28, 2013 Author Report Posted March 28, 2013 well can i do it with 2 15 in a box on a AB 750.1 looking at either smd 15 or some 15 mayhems maybe some nightshades Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
Ben Fultz Posted March 28, 2013 Report Posted March 28, 2013 Not with 750 watts Ab 750.1 isn't a 750 watt amp. VFL-750.1 CLASS D (7500 Watts ) 4OHM RMS POWER ; 2217W x 1 2OHM RMS POWER ; 4425W x 1 1OHM RMS POWER ; 7673W x 1 1OHM RMS POWER @ 16V ; 8542W x 1 1OHM RMS POWER @18V ; 9034W x 1 FREQUENCY RESPONSE ; 15Hz ~ 270Hz SIGNAL TO NOISE RATION ; 85dB INPUT SENSITIVITY ; 6V ~ 0.2V CROSSOVER SLOPE ; 24dB/OCT LOW PASS FILTER ; 35Hz ~ 250Hz SUBSONIC FILTER ; 10Hz ~ 50Hz BASS BOOST ; 0 ~ 9dB @45Hz Master / Slave connection ( LINKABLE TO 2OHM ) REMOTE CONTROL LENGTH : 820mm
MrEwubbsZ Posted March 28, 2013 Report Posted March 28, 2013 Not with 750 watts Ab 750.1 isn't a 750 watt amp. VFL-750.1 CLASS D (7500 Watts ) 4OHM RMS POWER ; 2217W x 1 2OHM RMS POWER ; 4425W x 1 1OHM RMS POWER ; 7673W x 1 1OHM RMS POWER @ 16V ; 8542W x 1 1OHM RMS POWER @18V ; 9034W x 1 FREQUENCY RESPONSE ; 15Hz ~ 270Hz SIGNAL TO NOISE RATION ; 85dB INPUT SENSITIVITY ; 6V ~ 0.2V CROSSOVER SLOPE ; 24dB/OCT LOW PASS FILTER ; 35Hz ~ 250Hz SUBSONIC FILTER ; 10Hz ~ 50Hz BASS BOOST ; 0 ~ 9dB @45Hz Master / Slave connection ( LINKABLE TO 2OHM ) REMOTE CONTROL LENGTH : 820mm Lol pwned 2000 Ranger Build Log
Socky Posted March 28, 2013 Report Posted March 28, 2013 if you cant do a hair trick with 2 15's and 4k+ you are doing something wrong, i can do a small one with 2 15s on 2k+ in a leaky jeep, but only if the hair is thin. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
BassMunky Posted March 28, 2013 Author Report Posted March 28, 2013 ok thanks man will see and try it. Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
Recommended Posts
Archived
This topic is now archived and is closed to further replies.