kickass audio Posted May 3, 2013 Report Share Posted May 3, 2013 Wow im sorry but thats just fucking retarded! Thats like making a usb powered battery charger for your laptop. The power comes out and goes back in. smfh. That will NOT work. When you disconnect the battery do any other circuits in your truck have power? NO. So why would the cigarette lighter have power when you disconnect the battery? Just do like I said and hook a charger up to the bolts on your fuse box and be done with it. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Kyblack76 Posted May 3, 2013 Report Share Posted May 3, 2013 SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
killallblue Posted May 3, 2013 Report Share Posted May 3, 2013 So I just bought a 2005 trailblazer and I was just wondering what I can do with it like in car audio and maybe engine and I'm going be putting in dc xl 18 on dc 3.5k so if maybe some one has some feed back I will appreciate it and if you have done a trailblazer build can you help me out with the pros and cons >Oh and tou you think 3 battery's will be fine to power that 18 You can fit up to 4 18's in them. Along with 20 batteries, and a compete FBSS airride setup... There are tons of mods to do to a Trailblazer. Engine-wise, you can get a tune, CAI, E-fan, upgrade plugs and wires (for V- , I've seen a couple turbod ones running around too... 3 Batteries should be fine... The stock alt is a 150amp. Pretty beefy for stock. They make kick panels so you can add a set of 6 1/2's to the kicks without much fabrication... They Headunit can be modded to hold an indash DVD/screen... Trailvoy.com is also a site for the GMT360 platform (trailblazers, envoys, Rainier, Saab 97X, Bravada) trailvoy isnt the go to site anymore mayo started his own website with someother dudes Link to comment Share on other sites More sharing options...
kickass audio Posted May 3, 2013 Report Share Posted May 3, 2013 yeah thats gmtnation.com 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Ba55h3ad651 Posted May 5, 2013 Author Report Share Posted May 5, 2013 Alright one more question Can I run two kinetik 2000 and xtreme plus sealed lead acid battery but it's a 12 v but would that mess up my kinetik Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.