DylanBunch Posted May 6, 2013 Report Posted May 6, 2013 Wait you have to buy the crossover for the final impedance not the tweeter impedance. ......... fuck 2006 Ford Explorer 2 Team AA/Sundown 15s 6th order Ct Sounds 7k 4 PRV Mr500 8s Rockford p1000-2 Team Subsonic Lows
SnowDrifter Posted May 6, 2013 Report Posted May 6, 2013 Wait you have to buy the crossover for the final impedance not the tweeter impedance. ......... fuck LOL Whoops ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
DylanBunch Posted May 6, 2013 Report Posted May 6, 2013 I now need to return mine when they get here lol which now delays my install.... sweeeeeet 2006 Ford Explorer 2 Team AA/Sundown 15s 6th order Ct Sounds 7k 4 PRV Mr500 8s Rockford p1000-2 Team Subsonic Lows
DylanBunch Posted May 6, 2013 Report Posted May 6, 2013 If im wiring my 2 4ohm ones in series I only need 1 crossover right. Sorry to post jack lol 2006 Ford Explorer 2 Team AA/Sundown 15s 6th order Ct Sounds 7k 4 PRV Mr500 8s Rockford p1000-2 Team Subsonic Lows
meridianofinsanity Posted May 8, 2013 Report Posted May 8, 2013 You need the crossover at the final impedance because your crossover doesn't know or care if you have two speakers it only matters the ohms if you have two 4 ohms in series its 8 ohms so you would need a 8 ohm crossover if you have two 8 ohm in parallel its 4 ohms and each channel needs a cross over if not you will have mono sound and why do all this work for sq but only run mono
Recommended Posts
Archived
This topic is now archived and is closed to further replies.