SnowDrifter Posted May 17, 2013 Report Share Posted May 17, 2013 You have both a slot port and an round port entered into the program. You need to pick one or the other lol ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
gally Posted May 17, 2013 Author Report Share Posted May 17, 2013 if im not mistaking in Port dimensions..height and width are for a slot port, meanwhile # of ports and diameter are for a aero port if im right (lenght are for both the same) also in port dimension..width means the dimension of the box air hole? 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
gally Posted May 18, 2013 Author Report Share Posted May 18, 2013 help?? 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
gally Posted May 18, 2013 Author Report Share Posted May 18, 2013 if i use 2 subs..do i double the woofer displacement? 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
Skullz Posted May 18, 2013 Report Share Posted May 18, 2013 Yes, the displacement would be for both woofers. For some reason when you input everything in metric getting the right tuning seems to be off, so if i convert everything to standard and input it your port would need to be 35cm long to get a tuning of 35hz. I would suggest to play with the tuning in standard sizes to get a more accurate figure and then convert it over to metric for building it. 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
gally Posted May 18, 2013 Author Report Share Posted May 18, 2013 Yes, the displacement would be for both woofers. For some reason when you input everything in metric getting the right tuning seems to be off, so if i convert everything to standard and input it your port would need to be 35cm long to get a tuning of 35hz. I would suggest to play with the tuning in standard sizes to get a more accurate figure and then convert it over to metric for building it. thanks....i found out that using torres for normal non-aero ported boxes makes things a lot easier----so id go rather with a slot ported one..+ less holes to drill 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.