wccfan12 Posted May 24, 2013 Report Share Posted May 24, 2013 Hi all, I recently purchased a Dc audio bass knob for my DC 3.5k and I wired it to the amp yesterday. THe power light comes on but when you turn the knob it doesn't affect the sound. You can still hear a little bass but it sounds like it's barely up. Anything I'm over looking? I tried turning the switch from master to slave but it didn't help any. Thanks! Quote THE ANTHRACITE DYC CRUISER -Fully dipped anthracite grey pt cruiser -4 skar vvx 12's (version 1) -Mechman 240 amp alt -Big three in Cadence 1/0 -1 deka intimidator g31 blacktop under the hood -1 C&D 140ah Batt & 1 C&D 55ah batt in the rear -Re audio/soundstream mids and highs -Hifonics Zues 600.4 -DC Audio 3.5k Link to comment Share on other sites More sharing options...
MrClean636 Posted May 24, 2013 Report Share Posted May 24, 2013 Had the same problem with mine. DC was going to replace it but I never received it. If you can't get it to work just buy a PAC LC-1. Good luck man Quote Car: 2011 Ford Taurus SEL / Alt: DC Power 270XP (Will be here 7/17!!!) Deck: Pioneer AVIC-Z140BH / Amps: (1) DC 5.0k, (1) RF T400-2 Speaks: RF T2652-S 6.5" and RF T1692 6x9" Subs: (2) DC XLm2 15's / Batts: (2) XS XP3000's Wiring: Kolossus Fleks Kable 1/0 (2 runs) Link to comment Share on other sites More sharing options...
T.A.G. Audio Posted May 24, 2013 Report Share Posted May 24, 2013 Did you use the cord that they sent you? Quote 03 Ford f150 2 Sa8 v2s Ap 1800d... Stinger 0 Guage CA Auto/ Electric Big 3 Xs power d680 in parallel with new group 65 stocker Soon to come another d680 Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back Soon to come Pioneers all around Focal Solid 4 Speaker Amp Kenwood KDC-X896 Memphis Line Driver My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/ Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee Link to comment Share on other sites More sharing options...
wccfan12 Posted May 24, 2013 Author Report Share Posted May 24, 2013 Thanks for the replies. Yes I used their cord they sent everything the cord and the knob but it just doesn't work. When you turn it all the way from max from min nothing happens. The clipping light doesn't flash but the power light is on. Quote THE ANTHRACITE DYC CRUISER -Fully dipped anthracite grey pt cruiser -4 skar vvx 12's (version 1) -Mechman 240 amp alt -Big three in Cadence 1/0 -1 deka intimidator g31 blacktop under the hood -1 C&D 140ah Batt & 1 C&D 55ah batt in the rear -Re audio/soundstream mids and highs -Hifonics Zues 600.4 -DC Audio 3.5k Link to comment Share on other sites More sharing options...
MrClean636 Posted May 24, 2013 Report Share Posted May 24, 2013 Thanks for the replies. Yes I used their cord they sent everything the cord and the knob but it just doesn't work. When you turn it all the way from max from min nothing happens. The clipping light doesn't flash but the power light is on. Exactly what mine did. Quote Car: 2011 Ford Taurus SEL / Alt: DC Power 270XP (Will be here 7/17!!!) Deck: Pioneer AVIC-Z140BH / Amps: (1) DC 5.0k, (1) RF T400-2 Speaks: RF T2652-S 6.5" and RF T1692 6x9" Subs: (2) DC XLm2 15's / Batts: (2) XS XP3000's Wiring: Kolossus Fleks Kable 1/0 (2 runs) Link to comment Share on other sites More sharing options...
Noel989 Posted May 24, 2013 Report Share Posted May 24, 2013 Make sure you turn it to the left Quote Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
OrionStang Posted May 24, 2013 Report Share Posted May 24, 2013 Did you set the gain on the amp itself? Have you contacted DC? Very important, leave the switch on Master. That has nothing to do with the remote knob. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
wccfan12 Posted May 24, 2013 Author Report Share Posted May 24, 2013 Yes the gain is set on the amp and no I haven't contacted DC yet just wanted to see if it was something simple I was overlooking before I started contacting them. Thanks for all the help guys, I might just send it back and get an LC-1 or something Quote THE ANTHRACITE DYC CRUISER -Fully dipped anthracite grey pt cruiser -4 skar vvx 12's (version 1) -Mechman 240 amp alt -Big three in Cadence 1/0 -1 deka intimidator g31 blacktop under the hood -1 C&D 140ah Batt & 1 C&D 55ah batt in the rear -Re audio/soundstream mids and highs -Hifonics Zues 600.4 -DC Audio 3.5k Link to comment Share on other sites More sharing options...
OrionStang Posted May 24, 2013 Report Share Posted May 24, 2013 LC-1 is a better choice anyway. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
will77530 Posted May 24, 2013 Report Share Posted May 24, 2013 they can warranty it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.