slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Then came out with this!! Test fitting in the truck Threw my 2500.1 in there just to see how it looked, I like it! Recognize this? My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Got some batteries for the back XS d2700's. I could have gone with d3100's but it would have been a tight fit especially if I got with a wider enclosure which is very possible down the road so I gain about an inch for box width if I use these. I threw in the panels the box and new batteries just to see how it looks in there don't worrie I know you can see the foil backing on the deadener, even though you would have to be looking from the floor to see it I am going to fix that and I left a gap between the box and bottom panels so I can go with a wider box on the next build. FYI if you couldnt tell by now I ditched the front and rear bench set up and I'm going to 4 captain's chairs all electric leather, I threw on in so I could see how it looked My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
Smoove Posted June 3, 2013 Report Share Posted June 3, 2013 Man that looks good. 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Oh forgot to post this, someone asked how much I angled the cup holders, couldn't get a good picture or a good reference but it was 70 degrees based from this point I dunno if that helps. That was taken off of the top left corner of the center colsole in this picture...Like I said hard to get a reference for the angle Here's why it has to be angled My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
OrangeJuiced Posted June 3, 2013 Report Share Posted June 3, 2013 Wow man this looks amazing! Great ideas and way to put those finishing touches on it all. 2001 GMC Sierra Build. Body dropped and Juiced Link to comment Share on other sites More sharing options...
slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Man that looks good. Thanks man! Wow man this looks amazing! Great ideas and way to put those finishing touches on it all. Thanks you, Lookin forward to checkin out your build! My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
COLTON94 Posted June 3, 2013 Report Share Posted June 3, 2013 Ojs build is legit u wont be disipointed. But great work on ur build. Never knew their were oval subs or that boston quit makin subs Link to comment Share on other sites More sharing options...
slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Ojs build is legit u wont be disipointed. But great work on ur build. Never knew their were oval subs or that boston quit makin subs Yeah sad day for boston fans, Yeah got about halfway through his build then had to go help my roomate with something but I will eventually make it through the 30+ pages lol! Getting ready to post up some more pics though. My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 decided to get to work on the 5.25" in the dash, got really busy so for got to take in progress pics but here is where I endedSome plastic body filler Some speaker rings I made with my jasper circle jig I noticed this while workin on the dash, looks like I;m going to be sanding this whole bastard down till I get all the original factory paint off, gonna have to paint the whole thing now.....well......shit! My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
slc123 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Got too tired to start the sanding on those speakers in the dash but will be getting some more sand paper so I can get these beaches done this week! My 03' sierra crew cab Here build in progress Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.