Dc audio enclosure for 18

[Ba55h3ad651]

Does the link show a box design?

[Ba55h3ad651]

What does dp and diameter mean in the aj designer

[Ba55h3ad651]

Any one know?

[Dwn4BassAlan]

dp is the diameter port width, that's the problem with free box software, it's intended for a round port, you'll just have to make it as best as you can by giving it an estimate.

[Dwn4BassAlan]

diameter is diameter of the subwoofer (18"/15"/12"/10")

[Ba55h3ad651]

Damn if you look at my others post I posted about have two 18s I was wondering if I can just cut all the measurements in half? Here's the link http://www.stevemeadedesigns.com/board/topic/169443-05-trailblazer-dc-audio/

[Joe X]

Easiest to build for 1 sub but same spec:

Enclosure Specifications:

Fb = 32 Hz
Vb = 6 ft^3

External Height = 18 in
External Width = 45 in
External Depth = 22 in

Port Width = 6 1/8 in

Cut Sheet List:

* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 45 x 22

Left & Right Sides =
Side 1 = 20 1/2 x 15 3/4
Side 2 = 21 1/4 x 15 3/4

Front = 38 1/8 x 15 3/4

Back = 45 x 15 3/4

L Port Internal Assembly Parts:

Front to Back = 14 3/8 x 15 3/4
Extension = 9 x 15 3/4

Assembly guide (generic dimensions):

Important notes:

- The 45s if you want to do them are 2 1/2" wide except the one/ones inside the port, if you want that let me know.

- All boxes built outside the vehicle need to fit in their way in not just have the right dimensions.

- This box should be operated around subwoofer(s) rated power. If that´s not the case, let me know.

- The port needs 6 1/8" of free airspace in front of it for proper operation.

- Setting your amp subsonic filter to 28Hz is suggested.

[Ba55h3ad651]

Thanks a lot joe now I can start building