2 15" Sundown E Series Box Design ... Need Critique or Approval of My Dimensions!!!!

[Wood]

MY CAR IS A 2011 NISSAN ALTIMA S (SEDAN) THESE ARE THE DIMENSIONS GIVEN TO ME WHEN I WAS INTERESTED IN THE SUNDOWN ZV3'S (BUT I THINK THE BOX WAS TOO SMALL CONSIDERING AFTER A BIT OF RESEARCH ITS CLOSER TO THE AIR SPACE OF THE E SERIES)... I ALREADY HAVE THE WOOD CUT SO IM HOPING THIS DESIGN WILL BE OK.. IF NOT I'LL JUST HAVE TO BUY MORE WOOD AND START OVER, BUT I WOULD LIKE TO TRY AND SAVE MY WOOD FIRST!

I WILL BE POWERING THEM WITH A ROCKFORD FOSGATE 1000.1BDCP

Enclosure Specifications:

Fb = 33.5 Hz
Vb = 6 ft^3

External Height = 17 in
External Width = 39 in
External Depth = 28.75 in

Port Width = 7 in

Cut Sheet List:

* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2x Front = 15 5/8 x 15 1/2
2x Front Internal = 14 1/8 x 15 1/2
Back = 39 x 15 1/2

Left & Right Sides: 27 1/4 x 15 1/2

Top & Bottom = 39 x 28 3/4

Shared Port Internal Assembly Parts:

2 x Front to Back = 23 3/4 x 15 1/2
2 x Extension = 1 1/2 x 15 1/2

Assembly guide (generic dimensions):

[Wood]

Anyone???

[banginhummer]

Looks pretty good!!

[Wood]

Looks pretty good!!

Dimensions and airspace are good for those subs? I ask because the box was designed for totally different subs (sundwon zv3s smh) so im trying to make sure its not too much or too little airspace for the e series

[bassinyerface]

Nah its good. I have a little bit bigger box. About 4 cubes per sub. It slams. Nuff said

[Wood]

Nah its good. I have a little bit bigger box. About 4 cubes per sub. It slams. Nuff said

Woah!! You have 2400 running to them???

[Joe X]

Looks pretty good!!

Dimensions and airspace are good for those subs? I ask because the box was designed for totally different subs (sundwon zv3s smh) so im trying to make sure its not too much or too little airspace for the e series

Do you have a link for where you took those specs? it's better to redo the box for the subs you are wanting to use now. Other than that it seems your budget changed drastically I guess.

[Wood]

Looks pretty good!!

Dimensions and airspace are good for those subs? I ask because the box was designed for totally different subs (sundwon zv3s smh) so im trying to make sure its not too much or too little airspace for the e series

Do you have a link for where you took those specs? it's better to redo the box for the subs you are wanting to use now. Other than that it seems your budget changed drastically I guess.

I looked on the sundown site... and it looks like all there specs are the same (im guess prefab specs after doing further research ) ... my budget changed because i dont have my monte carlo anymore, it was paid off.. now i have a car note plus its not only an audio build but im doing the full car since my car came completely stock. at the time my MC was already visually appealing, and had everything but the subs