Wood Posted June 6, 2013 Report Share Posted June 6, 2013 MY CAR IS A 2011 NISSAN ALTIMA S (SEDAN) THESE ARE THE DIMENSIONS GIVEN TO ME WHEN I WAS INTERESTED IN THE SUNDOWN ZV3'S (BUT I THINK THE BOX WAS TOO SMALL CONSIDERING AFTER A BIT OF RESEARCH ITS CLOSER TO THE AIR SPACE OF THE E SERIES)... I ALREADY HAVE THE WOOD CUT SO IM HOPING THIS DESIGN WILL BE OK.. IF NOT I'LL JUST HAVE TO BUY MORE WOOD AND START OVER, BUT I WOULD LIKE TO TRY AND SAVE MY WOOD FIRST! I WILL BE POWERING THEM WITH A ROCKFORD FOSGATE 1000.1BDCP Enclosure Specifications:Fb = 33.5 HzVb = 6 ft^3External Height = 17 inExternal Width = 39 inExternal Depth = 28.75 inPort Width = 7 inCut Sheet List:* All Dimensions in Inches.* Wood Thickness is 3/4 for all Parts.External Enclosure Parts:2x Front = 15 5/8 x 15 1/22x Front Internal = 14 1/8 x 15 1/2Back = 39 x 15 1/2Left & Right Sides: 27 1/4 x 15 1/2Top & Bottom = 39 x 28 3/4Shared Port Internal Assembly Parts:2 x Front to Back = 23 3/4 x 15 1/22 x Extension = 1 1/2 x 15 1/2Assembly guide (generic dimensions): 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted June 6, 2013 Author Report Share Posted June 6, 2013 Anyone??? 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
banginhummer Posted June 6, 2013 Report Share Posted June 6, 2013 Looks pretty good!! *Hummer H3* HeadUnit Pioneer AVH-X4600BT Mids and Highs 8-CT Sounds Pro 8" 8ohm 4-CT Sounds Pro Tweeters Amplifiers 1-CT Sounds 125.4 1-CT Sounds 60.4 1-CT Sounds 7000.1 Electrical 3-Runs of 1/0 CT Sounds 8-XS Power D3100 3-Iraggi 300 amp Alternators Subwoofers 4-SQ Hdc3 15" Subwoofers (Soon to be 4 15" Ct Sounds EXO) Link to comment Share on other sites More sharing options...
Wood Posted June 6, 2013 Author Report Share Posted June 6, 2013 Looks pretty good!! Dimensions and airspace are good for those subs? I ask because the box was designed for totally different subs (sundwon zv3s smh) so im trying to make sure its not too much or too little airspace for the e series 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
bassinyerface Posted June 7, 2013 Report Share Posted June 7, 2013 Nah its good. I have a little bit bigger box. About 4 cubes per sub. It slams. Nuff said 2003 f150, 2 ab hd 15 on brutus 2400.1, kinetik batt, big 3, knu wire, image dynamics cxs 6.5 with ppi tweets, pioneer 1din and clarion eq. Link to comment Share on other sites More sharing options...
Wood Posted June 7, 2013 Author Report Share Posted June 7, 2013 Nah its good. I have a little bit bigger box. About 4 cubes per sub. It slams. Nuff said Woah!! You have 2400 running to them??? 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Joe X Posted June 7, 2013 Report Share Posted June 7, 2013 Looks pretty good!! Dimensions and airspace are good for those subs? I ask because the box was designed for totally different subs (sundwon zv3s smh) so im trying to make sure its not too much or too little airspace for the e series Do you have a link for where you took those specs? it's better to redo the box for the subs you are wanting to use now. Other than that it seems your budget changed drastically I guess. Link to comment Share on other sites More sharing options...
Wood Posted June 7, 2013 Author Report Share Posted June 7, 2013 Looks pretty good!! Dimensions and airspace are good for those subs? I ask because the box was designed for totally different subs (sundwon zv3s smh) so im trying to make sure its not too much or too little airspace for the e series Do you have a link for where you took those specs? it's better to redo the box for the subs you are wanting to use now. Other than that it seems your budget changed drastically I guess. I looked on the sundown site... and it looks like all there specs are the same (im guess prefab specs after doing further research ) ... my budget changed because i dont have my monte carlo anymore, it was paid off.. now i have a car note plus its not only an audio build but im doing the full car since my car came completely stock. at the time my MC was already visually appealing, and had everything but the subs 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.