Brian Russell Posted August 17, 2013 Report Share Posted August 17, 2013 I'd like to submit my guesses for the DC Audio 1.2k Certified 1401 Uncertified 1530 Dynamic 1792 Total 4723 My guesses are assuming the amp will be tested on the 14 volt bank and also may I ask to have the amp tested dynamically at 0.5 ohm also? Hopefully, THANKS Link to comment Share on other sites More sharing options...
shoulinpanther Posted August 17, 2013 Report Share Posted August 17, 2013 4006 Link to comment Share on other sites More sharing options...
Purplehaze Posted August 17, 2013 Report Share Posted August 17, 2013 3991 total Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted August 17, 2013 Report Share Posted August 17, 2013 4678 Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Mike Whitenton Posted August 17, 2013 Report Share Posted August 17, 2013 4147 Link to comment Share on other sites More sharing options...
trivalboss Posted August 17, 2013 Report Share Posted August 17, 2013 1463 Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted August 17, 2013 Report Share Posted August 17, 2013 This week's specimen is the DC Audio 1.2k. Rated 1200w RMS @ 14.4v @ 1ohm. The three closest guesses to the CERTIFIED (1% Distortion) Un-Certified (to clipping) and Dynamic Burst RMS (to clipping) numbers COMBINED, will win a snazzy T-Shirt. That is ALL THREE MODES COMBINED to make one big number. The impedance is 1 ohm. I did some testing @ .8 ohms and popped the fuses @ .5 ohms But the amp still works so it protected itself, which is another plus for any brand. Just don't blow......is half of what i expect in a decent amp. You guys have till Tuesday the 20th to get your guesses in! I'd like to submit my guesses for the DC Audio 1.2k Certified 1401 Uncertified 1530 Dynamic 1792 Total 4723 My guesses are assuming the amp will be tested on the 14 volt bank and also may I ask to have the amp tested dynamically at 0.5 ohm also? Hopefully, THANKS I think he answered your question before you asked it, unless I am reading wrong Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
ZombieFatMan Posted August 17, 2013 Report Share Posted August 17, 2013 Certified: 1402 Uncertified to clipping: 1480 Dynamic: 1510 Total: 4392 "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..." Link to comment Share on other sites More sharing options...
xTIDEx Posted August 17, 2013 Report Share Posted August 17, 2013 4550 Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 17, 2013 Report Share Posted August 17, 2013 4117 sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Recommended Posts