twisted1 Posted September 21, 2013 Report Share Posted September 21, 2013 put just regular switch an then when you wanna watch movie just flop it on off on then movie plays. I have mine like this 09 mustang gt Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted September 22, 2013 Report Share Posted September 22, 2013 I have this model and an Iphone 4s everything was fine untill 24 hours ago. My callers incomming and outgoing can hear me fine but I cannot hear them through my car speakers on bluetooth. everything else works is i stream youtube or music via blue tooth it works no problems only hearing during calls any suggestions ? I have a different model (8800bh) and there is a voice privacy setting on the head unit that toggles that. Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Dragonware Posted September 22, 2013 Author Report Share Posted September 22, 2013 on or off it still does the same thing i tried another phone tho but ill double check My Build log : http://www.stevemeadedesigns.com/board/topic/170934-dragonmobile-re-audio-2300rms-stealth-build-08-focus/ Current System 2020 Ford F-150 XLT Supercrew Audio Control Epicenter Audio Control LC7i Taramp PRO 2.6 DSP Taramp DS4x800 - Highs Taramp HD3000.1 Mids Taramp MD5000.1 Bass 8 x DS18 6.5 Pro x6m - mids 2 x Soundsteam SST-05 Bullet Tweeter 2 x DS18 TW220 Super Tweeters 4 X SkarAudio EVL-8 BASS Big 3 Yellow Top Link to comment Share on other sites More sharing options...
AI James Posted September 26, 2013 Report Share Posted September 26, 2013 what vehicle is it in? bluetooth uses only the front channels of your deck. so i would make sure those are hooked up correctly. Link to comment Share on other sites More sharing options...
Dragonware Posted September 26, 2013 Author Report Share Posted September 26, 2013 yea I figured that out Rear on the deck was conected to my front ch on the amp and that then ran to front on my matrix audio control it was a little messed up lol its working now thanks My Build log : http://www.stevemeadedesigns.com/board/topic/170934-dragonmobile-re-audio-2300rms-stealth-build-08-focus/ Current System 2020 Ford F-150 XLT Supercrew Audio Control Epicenter Audio Control LC7i Taramp PRO 2.6 DSP Taramp DS4x800 - Highs Taramp HD3000.1 Mids Taramp MD5000.1 Bass 8 x DS18 6.5 Pro x6m - mids 2 x Soundsteam SST-05 Bullet Tweeter 2 x DS18 TW220 Super Tweeters 4 X SkarAudio EVL-8 BASS Big 3 Yellow Top Link to comment Share on other sites More sharing options...
gally Posted September 26, 2013 Report Share Posted September 26, 2013 Without shelling out $30 for a bypass hack on ebay or adding a unsightly switch somewhere My installer tried using a relay that trigers with the remote wire to send ground to the parking brake wire. it works 50-50 sometimes i have to power cycle the headunit or remove the disc and try again seems anoying. is this becuase the relay powers on too quickly and should power on after the deck is booted ? Any cheaper alternatives ? or solutions guys ? Thanks i did a similiar thing to my AVH 2400BT...i simply wired my parking brake on to the ground brake(of the radio)...all wires were on radio.. then i taped it and it all work without any relays 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.