I just got my 2nd level 3 15 and it dosent seem any louder? PLEASE HELP

[dylan117]

so I did have a single level 3 15 running on 1200rms (hifonics brz1200) so a few days ago I got my 2nd one I put it in my L-ported box 6.2 cubes tuned @ 33hz and it really dosent seem much louder there both M2s getting around 600rms a piece (I know its underpowered) but still shouldn't 2 on lower power be louder than 1 on more power? ALSO the new level 3 has a more textured surround and the cone is more glossy looking and the older one (2 months older) had a more smooth surround and the cone is more dull colored? ONE last thing the new one seems to be moving a little more than the other ive double check the wiring and it seems right both wired @ 1 ohm (there dual 2s) but I have them hooked up on 2 sets of terminals (each one is wired sepratly) I think you guys can help anything is appreciated

[stevog]

if there both dual 2s you can only wire at .5 ohm or 2 ohm. What do you mean by wired separately did you just stick the leads of each sub on the amp +- and +-?

Edited September 11, 2013 by stevog

[Kyblack76]

Your wired at 2ohms?

NINJA

Edited September 11, 2013 by KyLar96

[dylan117]

I might be but I have 2 sets of terminals coming from my box (4 actual connectors) for ex. ive got 1 wire leading to 1 set of box terminals and 1 set of wire leading to the other is that still 0.5 or 2 ohms im toataly lost here lol

[CJ18]

If one is moving more than the other, 1 is broken in and the new one isnt. You are also either wired to .5 ohm or 2 ohms. Oh and you arent seeing 1200w either.

[Kyblack76]

eeeeek...

dont do anything, until you read more ...

[dylan117]

@ CJ that what I was thinking but what baffles me is the new one is actually a little LOSER than the old one I think (the new one is only 3-4 days old)

[PlasticMind]

Yeah take a pic or draw up your wiring diagram. So ppl can understand what you have done.

[dylan117]

ive got the pic but how the hell do I attach it?

[CJ18]

Who did you order them through?