swishahouse22 Posted September 29, 2013 Report Share Posted September 29, 2013 setup atm: Asus sabertooth 990FX r2 MB, 8GB of 1600mhz corsair vengeance ram ddr3, Phenom II Quad 965 BE stock 3.4 OC'd @ 4ghz w/ some off brand watercooling that came in the Alienware predator case and a sapphire radeon 7790 1 gig card with a crucial 128gb ssd. All my temps seem to stay high when at idle I no that it has to do with some of the air outside the case but also the case has no ventilation so im buying the AZZA Genesis 9000 Case but still would like to know of a good decent priced watercooling or air cooled. thnks guys [media][/media] Link to comment Share on other sites More sharing options...
Facekicker Posted September 29, 2013 Report Share Posted September 29, 2013 http://www.newegg.com/Product/Product.aspx?Item=N82E16835181032 I use this on my 8 core and I'm happy with temps, even when my case temps rise a little when bitcoin mining. They sell a refurbed version 1 for cheap, if you're on a budget there is nothing wrong with using that one. 2002 Monte Carlo Started a build log Fi, DC, Mechman, XS Power Link to comment Share on other sites More sharing options...
swishahouse22 Posted September 29, 2013 Author Report Share Posted September 29, 2013 hell yea dude I like that cooler I shop amazom the same price this thing will fit my new case lol plus 2 more. would I be able to get two more fans for push/pull config [media][/media] Link to comment Share on other sites More sharing options...
swishahouse22 Posted September 29, 2013 Author Report Share Posted September 29, 2013 94 bucks on amazon [media][/media] Link to comment Share on other sites More sharing options...
Facekicker Posted September 29, 2013 Report Share Posted September 29, 2013 I do use the push/pull config, I have Cougar fans doing the pulling. 2002 Monte Carlo Started a build log Fi, DC, Mechman, XS Power Link to comment Share on other sites More sharing options...
BobbyG2 Posted September 29, 2013 Report Share Posted September 29, 2013 Isobaric fans FTW I've used Zalman coolers and they work great for me. Overclocked my C2D E6320 from 1.8 to 3.0 and stayed in the 40s C under load a few years back. I'll probably go back to them when I upgrade. *New vehicle and system coming soon.* Link to comment Share on other sites More sharing options...
boostin302 Posted October 1, 2013 Report Share Posted October 1, 2013 i have that H100i on my I7 3770 and have had no problems what so ever. before you switch out to a new cooler, i recommand that you reapply your thermal paste just to make sure it is/hasnt been applied wrong or is dried up. your going to have to pull the old cooler off anyways to put on a new one so it should be no biggie. could save you some money and a headache. My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.