MoneyPitInvestR Posted October 23, 2013 Report Share Posted October 23, 2013 i have a crescendo 3500. worked great, never had a problem. i took it out today to clean up my wiring and add a battery and when i was all done and reinstalled it, no sound from subs. i checked both rca's. had AC readings. amp powers up normal. subs read out correctly. so i checked the AC voltage on the speaker outputs and no voltage. ill assume thats the answer. i opened it up, checked it out. nothing looks bad or loose. Any ideas how it happened or possibly how to fix. Better yet who can i send it to for repair? 2006 Impala LS Pioneer AVH-P4300dvd "Big 3" 0awg Iraggi 320a alt. XS D3400 hood Kinetik 2000 rear XS XP3000 rear 2 XS D3100 rear Knoknoise back half of car Crescendo 3500 Dual power/ground runs Toolmaker dual inputs and battery terminals 2 Sundown Zv4 12's 6.8cu. ft. gross 4.8nettuned 30hz Link to comment Share on other sites More sharing options...
mikeg321 Posted October 24, 2013 Report Share Posted October 24, 2013 Check the master/slave switch, make sure its on master 4 fully loaded Fi sp4 15's 2 Crescendo bc5500s Crescendo c1100.4 6 focal mids Vifa tweets 5 XS Power d3100's Pioneer avh-p4200dvd All crammed into a mustang. http://www.stevemeadedesigns.com/board/topic/150569-mikeg321s-fi-nendo-mustang-getting-walled-videos-page-4/ Link to comment Share on other sites More sharing options...
mnrookie Posted October 24, 2013 Report Share Posted October 24, 2013 Also check your lpf, make sure it's not all the way down. Link to comment Share on other sites More sharing options...
afrakes Posted October 24, 2013 Report Share Posted October 24, 2013 There would still be voltage at the terminal if it was in slave mode. Vehicle: 2014 GMC Sierra 2500HD WT Head Unit: Pioneer DEH- Mids/Highs: Focal Integration ISC 165’s (front) Subs/Amps: TBD Link to comment Share on other sites More sharing options...
mikeg321 Posted October 24, 2013 Report Share Posted October 24, 2013 There would still be voltage at the terminal if it was in slave mode.No there wouldn't, it happened to me when I put my 5500s in. Accidently flipped the switch to slave on one of the amps and was getting 0v ac on the outputs. 4 fully loaded Fi sp4 15's 2 Crescendo bc5500s Crescendo c1100.4 6 focal mids Vifa tweets 5 XS Power d3100's Pioneer avh-p4200dvd All crammed into a mustang. http://www.stevemeadedesigns.com/board/topic/150569-mikeg321s-fi-nendo-mustang-getting-walled-videos-page-4/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.