K_SubieXT Posted October 28, 2013 Report Share Posted October 28, 2013 Does anyone know the contact info for d'amore? I need to get my DD-1 repaired but I'm not getting any response from the [email protected] email address. Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
TonyD'Amore Posted October 28, 2013 Report Share Posted October 28, 2013 Correct email is [email protected] also our warranty contact information is in the owners manual. What type of issue are you having? Quote Link to comment Share on other sites More sharing options...
K_SubieXT Posted October 28, 2013 Author Report Share Posted October 28, 2013 (edited) I got it used from a friend so I'm not sure if it's covered. When I would use it on my crescendo 2k the distortion light would just randomly flicker as I set the gain and when I used it on my small Rockford 4 channel it wouldn't detect a signal at all. Now it doesn't show a signal on either amp. Edited October 28, 2013 by Bass Fiend Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
Wood Posted October 28, 2013 Report Share Posted October 28, 2013 I got it used from a friend so I'm not sure if it's covered. When I would use it on my crescendo 2k the distortion light would just randomly flicker as I set the gain and when I used it on my small Rockford 4 channel it wouldn't detect a signal at all. Now it doesn't.mt show a signal on either amp. Not trying to be funny or anything, but did you check to see if the battery needed to be changed? Quote 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
K_SubieXT Posted October 28, 2013 Author Report Share Posted October 28, 2013 (edited) I got it used from a friend so I'm not sure if it's covered. When I would use it on my crescendo 2k the distortion light would just randomly flicker as I set the gain and when I used it on my small Rockford 4 channel it wouldn't detect a signal at all. Now it doesn't.mt show a signal on either amp.Not trying to be funny or anything, but did you check to see if the battery needed to be changed?I never got a low battery light on it so I never bothered switching it out Edited October 28, 2013 by Bass Fiend Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
Wood Posted October 28, 2013 Report Share Posted October 28, 2013 I got it used from a friend so I'm not sure if it's covered. When I would use it on my crescendo 2k the distortion light would just randomly flicker as I set the gain and when I used it on my small Rockford 4 channel it wouldn't detect a signal at all. Now it doesn't.mt show a signal on either amp.Not trying to be funny or anything, but did you check to see if the battery needed to be changed?I never got a low battery light on it so I never bothered switching it out Maybe you should try that first.. just a quick troubleshoot that may end all the problems also batteries still drain while not in use so it may have died completely at any point in time (considering you got it used) ... just trying to help save you time and money Quote 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
K_SubieXT Posted October 28, 2013 Author Report Share Posted October 28, 2013 I'll give it a try, thanks man Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
meade916 Posted October 28, 2013 Report Share Posted October 28, 2013 the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
K_SubieXT Posted October 28, 2013 Author Report Share Posted October 28, 2013 the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels. The distortion light would never come on fully to show distortion, just randomly flash when turning the gain and never at the same point. I could turn the gain all the way up with out the light fully coming on to show distortion Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
Karkov Posted October 28, 2013 Report Share Posted October 28, 2013 the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels. The distortion light would never come on fully to show distortion, just randomly flash when turning the gain and never at the same point. I could turn the gain all the way up with out the light fully coming on to show distortion same thing happened to me but might just not be enough voltage going to the amp. Also, as Steve said the light will come on and off while turning up the gain and NOT at the same point as YOU stated. Says that right in the manual. maybe i missed it but what equipment are you using? Line driver needed perhaps? You got the manual for the DD-1 correct? Quote 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.