g2shuck Posted November 16, 2013 Report Posted November 16, 2013 got any good pics of hat you welded the plating to? I would assume you welded it to the cross braces? 2000 Toyota Camry With Sealed Off Trunk Sky High OFC Wiring DC Power 270 XP Alt AQ 2200 Sub Amp Two DC Level 4 m2 12s 80 Mil Murdetmat Gathering Parts For Wall Build. Team DC Audio 2014 Member
EricR Posted November 16, 2013 Author Report Posted November 16, 2013 There is a cross brace that runs side to side just past the b pillar. I took two 1.5" square tubes and welded the front into the inner structure of the ceiling then welded the back to the cross brace. The new ceiling is actually two pieces of plate, they meet in the middle. They are also forced to take a sort of curve, this makes the plate more ridged and less likely to flex. i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
EricR Posted November 18, 2013 Author Report Posted November 18, 2013 The pic of my mids/highs amps, the wiring is only about 25% complete so don't pay attention to the mess it will all be tidied up when finished. i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
g2shuck Posted November 19, 2013 Report Posted November 19, 2013 looking good 2000 Toyota Camry With Sealed Off Trunk Sky High OFC Wiring DC Power 270 XP Alt AQ 2200 Sub Amp Two DC Level 4 m2 12s 80 Mil Murdetmat Gathering Parts For Wall Build. Team DC Audio 2014 Member
04murdalanche Posted November 19, 2013 Report Posted November 19, 2013 Where in houston are you located? I used to live off beltway 8 and 249 north side. I got fam down there still I'd love to hear this bitch when it's done
dionysus Posted November 19, 2013 Report Posted November 19, 2013 The pic of my mids/highs amps, the wiring is only about 25% complete so don't pay attention to the mess it will all be tidied up when finished. Hell yeah CT Sounds!!! Can't wait to get my CT amp/sub! The builds looking great so far bro I can't wait to see how it comes out! Build log link, (Slow Build) http://www.stevemeadedesigns.com/board/topic/183469-dionysuss-02-eddie-bauer-explorer-slow-budget-build-sundown-4-chan-guts-pg-4/ Team AB son!
EricR Posted November 19, 2013 Author Report Posted November 19, 2013 Well I don't live in Houston anymore, I moved back up to North East Texas a couple years ago. i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
SnowDrifter Posted November 19, 2013 Report Posted November 19, 2013 Well... Umm.. Ok then. If there's nuclear warfare the first place I'm hiding is in your car Looking good bro ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
EricR Posted November 25, 2013 Author Report Posted November 25, 2013 Did quite a bit of work this weekend, who wants pics? i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.