MaliBOOM Posted November 18, 2013 Report Share Posted November 18, 2013 Welp, I had my car looking pretty solid but I'm never happy with anything so I decided to sell my wheels and look into a bag setup. Here is what she looked like with the 22s. Had solid stance but I wanted it lower+wider and my 22x8.5s were just too skinny to make me happy. It was lowered with cut H&R springs in front and un cut H&R's in the back. I have about 1200lbs of car audio shit in my trunk so I didn't need to cut the back due to the weight lol. That leads me to where I'm at now. I decided I wanted to go the fitment route vs just throwing on big rims and dropping it. With that I will be the first Malibu to run 20x10's. Obviously won't bolt right up as It will need a good bit of fender body work but if I can make it happen I hope it will be a crowd pleaser Originality>>> IMO. Here are the new pickups.....Stance SC-5's. Found them for a steal on ebay and once they get here they will be going straight to my powder coater Then I will be looking into bag setups and hopefully start piecing it together with the next month or 2! Here is how she sits now :/ RIP 22s www.TheAutoSkin.com MaliBOOM v2"2010 Bagged Malibu on 20s"<< click here<<< Excursion on 42s Build log<<Click here<<< Instagram-@theAutoSkinRyan @TheAutoSkin Owner of The Auto Skin Link to comment Share on other sites More sharing options...
79 cutty Posted November 18, 2013 Report Share Posted November 18, 2013 Those deeper dished rims should look good on there. Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
Soccerballzs Posted November 18, 2013 Report Share Posted November 18, 2013 Looks very nice! Liking it! http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/ Link to comment Share on other sites More sharing options...
truthsayer Posted November 18, 2013 Report Share Posted November 18, 2013 The first picture set up was extremely nice, i wouldn't have changed it. I don't think the new rims look as nice. Just my opinion. truthsayer Link to comment Share on other sites More sharing options...
MaliBOOM Posted November 18, 2013 Author Report Share Posted November 18, 2013 Looks very nice! Liking it! Thanks man! The first picture set up was extremely nice, i wouldn't have changed it. I don't think the new rims look as nice. Just my opinion. Ya the setup was solid but like I said I can't get MUCH lower with the 22s even if I bagged it. Which is redic IMO lol. So either keep springs and have a shitty ride on super narrow 22s or get way lower or wider rims/tires. Needed lower and wider www.TheAutoSkin.com MaliBOOM v2"2010 Bagged Malibu on 20s"<< click here<<< Excursion on 42s Build log<<Click here<<< Instagram-@theAutoSkinRyan @TheAutoSkin Owner of The Auto Skin Link to comment Share on other sites More sharing options...
HowLowCanYouGo Posted November 18, 2013 Report Share Posted November 18, 2013 Looks tits. I love the new rims! Nothing for now... Did you get that scar tissue when you got your vagina installed? I'd grab Adam's ass and look him in the eyes for a demo of nates truck. Link to comment Share on other sites More sharing options...
volkswagginvr6 Posted November 18, 2013 Report Share Posted November 18, 2013 nice! youll really like the stance wheels. my buddy runs that exact set 20x10 on his 350 z and they look very nice. but he wants more wide in the rear so he might be selling them soon..hmmm i might have to buy them. but anyways very nice bro.. what color you thinking for them since u said they will be going out to be powdercoated. Link to comment Share on other sites More sharing options...
MaliBOOM Posted November 18, 2013 Author Report Share Posted November 18, 2013 nice! youll really like the stance wheels. my buddy runs that exact set 20x10 on his 350 z and they look very nice. but he wants more wide in the rear so he might be selling them soon..hmmm i might have to buy them. but anyways very nice bro.. what color you thinking for them since u said they will be going out to be powdercoated. Thanks man I am siked! lol And I have a special color picked out for them Waiting on paint job and powdercoat to be done though before any details come out! www.TheAutoSkin.com MaliBOOM v2"2010 Bagged Malibu on 20s"<< click here<<< Excursion on 42s Build log<<Click here<<< Instagram-@theAutoSkinRyan @TheAutoSkin Owner of The Auto Skin Link to comment Share on other sites More sharing options...
volkswagginvr6 Posted December 5, 2013 Report Share Posted December 5, 2013 look forward to seeing what you have in store with them.plus air is always a good thing!! Link to comment Share on other sites More sharing options...
Wood Posted December 5, 2013 Report Share Posted December 5, 2013 I'm tuned into this one!!! I cant wait to stance my alti! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.