Krakin Posted November 26, 2013 Report Share Posted November 26, 2013 You can post a thread on here with what equipment you have, what car, and maximum dimensions, and someone will probably help you make one or make one for you. Krakin's Home Dipole Project http://www.stevemeadedesigns.com/board/topic/186153-krakins-dipole-project-new-reciever-in-rockford-science/#entry2772370 Krakin, are you some sort of mad scientist? I would have replied earlier, but I was measuring the output of my amp with a yardstick . . . What you hear is not the air pressure variation in itself but what has drawn your attention in the two streams of superimposed air pressure variations at your eardrums An acoustic event has dimensions of Time, Tone, Loudness and Space Everyone learns to render the 3-dimensional localization of sound based on the individual shape of their ears, thus no formula can achieve a definite effect for every listener. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted November 26, 2013 Author Report Share Posted November 26, 2013 Ok i have to measure it up sometime. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted November 27, 2013 Author Report Share Posted November 27, 2013 This is a picture of the Dimensions of the space. I plan on running 2 Sundown E-10s. Ported is possible idk what is really better for my application. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted November 27, 2013 Author Report Share Posted November 27, 2013 Anybody have any ideas Link to comment Share on other sites More sharing options...
Guest Posted November 27, 2013 Report Share Posted November 27, 2013 if thats a 5 for the top depth, im getting 2.31 cubes gross. just screwing with port numbers, a single 5" port, 17" long will yield 1.9 cubes at 36hz after 2 e-10's and the port displacements. 10.34sqin of port per cube. edit: im not a box king so dont trust my numbers 100% LOL. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted November 27, 2013 Author Report Share Posted November 27, 2013 so basically your saying put a 5x17 slot on one end? Could I put the port on the front face or the top? Link to comment Share on other sites More sharing options...
jarrius Posted November 27, 2013 Report Share Posted November 27, 2013 I think he may be talking about a aero port 2012 Chevy sonic1xSQ HDC3 12 D2RF R1200d 140 square foot of Q-Mat(soon to be installed) 140.2Db sealed on the dash with TL 142 DB sealed on the dash with another meter (was dead on with the TL at a show i was at) 141 on music. strangeduck,on 02 Jan 2014 - 01:39 AM, said: when my car spins out i just put the car in neutral, turn in the direction i want to go and pucker my asshole Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted November 27, 2013 Author Report Share Posted November 27, 2013 Id rather use a slot port. Where should I put it? Is it just a hole? or do I have to do like a labyrinth design? Link to comment Share on other sites More sharing options...
DubNDodge Posted November 27, 2013 Report Share Posted November 27, 2013 Grab some 5" PVC piping. Cut a hole in the box so the pipe will fit snug. Insert pipe. Find some way to seal off around it '01 Dodge Stratass Sealed Trunk Build Log 2008 Honda Fit Sport Build Log On 10/3/2013 at 10:00 AM, ROLEXrifleman said: Anyone who says they knew everything they wanted out of life at 19 can go suck a bag of dicks cause they are lying to themselves or brought up in a cult. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted November 27, 2013 Author Report Share Posted November 27, 2013 There has to be more to it than that what about tuning? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.