bcbrassard Posted November 5, 2014 Author Report Share Posted November 5, 2014 And with the T2s in. The blue masking tape goes well with the grey. Link to comment Share on other sites More sharing options...
razuuk004 Posted November 5, 2014 Report Share Posted November 5, 2014 About 8 hrs sanding to get finishing touches on door panel. Was down to 320 grit on the filler before priming. Looks good and not sure how perfect it has to be with the texture going on but its smooth. Tomorrow some fine sanding and filler touch up if needed. Still need to find color match paint. Try going to an automotive paint store. They all have color matching spray paint and texture making base from SEM. they usually have a rack displaying all the colors. If you don't know where the automotive paint store is, go to your nearest body shop and ask them where they buy their supplies locally. My Build Logs: Door Panels: http://www.stevemeadedesigns.com/board/topic/177508-door-panels-starting-new-02-civic/page-20 Speaker Box: http://www.stevemeadedesigns.com/board/topic/160740-need-help-designing-a-box/ Carbon Fiber: http://www.stevemeadedesigns.com/board/topic/167381-carbon-fiber-use-this-forum-to-show-off-your-custom-parts/ Headliner: http://www.stevemeadedesigns.com/board/topic/174476-headliner-re-invented-for-02-civic/ Link to comment Share on other sites More sharing options...
bcbrassard Posted November 5, 2014 Author Report Share Posted November 5, 2014 Thanks, i will try going to napa where they might have the best paint selection since they have a paint division. Remember, this is Alaska and we have 1/4 of what you guys would have at Walmart. lol Link to comment Share on other sites More sharing options...
rhedreen Posted November 5, 2014 Report Share Posted November 5, 2014 Looks really good! Can't wait to see em in the car! Dirty White 05' Xterra HU: Pioneer x9600bhs Front: RF R400-4D JL C5-075ct tweets RF PPS4-8 mids Subs: RF r1200-1d RF P3D4-15 x2 Link to comment Share on other sites More sharing options...
thefourth Posted November 5, 2014 Report Share Posted November 5, 2014 Lots of hand work on those doors paid off. They look great Thanks alaskanzx5 I might just do thatI can recone a sub myself. About a year ago I took 2 12" power acoustic mofos and made one sub. I took the magnet and the motor off of one and j b welded it to the other motor and magnet. I had to wind my own voice coil so it would work. After I was done hooked up to 2 boss 5000w amps. And shattered my back and all my side windows came to this thread to recommend soundqubed and ct sounds. OP goes with soundstream. oh lawd. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted November 5, 2014 Report Share Posted November 5, 2014 Napa can order cans for you as well. Something like $10 a can. Just have to figure out the paint code. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Soccerballzs Posted November 5, 2014 Report Share Posted November 5, 2014 Like it nice job! http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/ Link to comment Share on other sites More sharing options...
bcbrassard Posted November 5, 2014 Author Report Share Posted November 5, 2014 Sanded primer this morning and prepped for SEM texture. SEM texture is a finer spray than stock texture on door panels so i am going to try and shoot it again this afternoon and see if i can get it lay down heavier to match better. Great product though. I also went to napa and they have a ok selection, so i went around the corn to a pro paint shop that had a better selection. Color matched the best we could, color is Thomas Bus Grey. Ordered 4 cans. Also bought more SEM texture, and Lack Luster clear coat. Here pics before i am about to texture again. The Black is sex as hell but i like the Grey because it makes the speakers pop out more. Black i would have to repaint all the interior panels which isnt a big deal but i think black is harder to keep clean. Thanks for all the shout out guys. I am trying to do some quality work here, but as usually get a bit excited and rush it a tad. Just under the gun to get a lot ready so i can get garage time for next big upgrade. Link to comment Share on other sites More sharing options...
bcbrassard Posted November 5, 2014 Author Report Share Posted November 5, 2014 So which way do you guys like better. And trust me i favor black, one of my favorite tones. Link to comment Share on other sites More sharing options...
bcbrassard Posted November 5, 2014 Author Report Share Posted November 5, 2014 The black looks good until you put inside the car, Dash is grey so i would have to paint the dash and not in the mode for that. If it wasnt for the clash the black would look good. Grey it is unless i 2-tone it. Hmmm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.