Neel Posted November 14, 2009 Report Share Posted November 14, 2009 I got a question, I am using a Rane RPM 26z for my processing and I need the optical toslink output from my 9861 to be converted into the digital AES input on the Rane. I have seen little boxes from M-audio and Hosa that do the conversion...but it would require me to get those little boxes converted to run on 12v as well. Any ideas? Too Much Stuff to list . Link to comment Share on other sites More sharing options...
Basshead08 Posted November 14, 2009 Report Share Posted November 14, 2009 First of all, Ray this is awesome of you to have offered this for so long. My question, is body filler strong enough to fill in a small gap between two panels in my box. I am currently building and bracing the box as I go. One of my vertical braces ended up being a tad too tall causing the box to be a little off square on the back. I didn't realize it a problem until I attached the side and saw the gap. I can't go back and take the brace out because it has been fiberglassed in. System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
Ray Posted November 14, 2009 Author Report Share Posted November 14, 2009 But there's no fun in coming up with a mackie vlz16 and going out the rca outs... I would really like to do like 1/4" inupts in either door for wither of the guitarists and then one in the center for the bassist... but for vocals and micing the drums, yeah i see no other way than a mixer for that! hmmm...... mixer is the only right way bro. 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Ray Posted November 14, 2009 Author Report Share Posted November 14, 2009 Got a quickie. Quick question that is. Im currently into a build in my 02 ranger edge supercab. Cant decide whether to upward fire my BTL 12's or forward fire them. I like the upward firing seeing as its louder but love the punch in your back of the forward firing. The upward firing you also dont feel quite as much in your seat as you would forward firing and upward is harder on the back window. Need thoughts or opinions on which direction to fire the woofers and the ports. I like upfire. subs up port up I usally tune 3hz higher than normal when doing this 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Ray Posted November 14, 2009 Author Report Share Posted November 14, 2009 I got a question, I am using a Rane RPM 26z for my processing and I need the optical toslink output from my 9861 to be converted into the digital AES input on the Rane. I have seen little boxes from M-audio and Hosa that do the conversion...but it would require me to get those little boxes converted to run on 12v as well. Any ideas? This is why you should have used a bit1. toslink in But other than that, I dont see away around swapping the power supply to run 12v. Could use a noisy inverter 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Ray Posted November 14, 2009 Author Report Share Posted November 14, 2009 First of all, Ray this is awesome of you to have offered this for so long. My question, is body filler strong enough to fill in a small gap between two panels in my box. I am currently building and bracing the box as I go. One of my vertical braces ended up being a tad too tall causing the box to be a little off square on the back. I didn't realize it a problem until I attached the side and saw the gap. I can't go back and take the brace out because it has been fiberglassed in. no prob bro. Ummmmm I would just glass over the gap, you can shove kitty hair in there first too. then sand smooth 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Basshead08 Posted November 14, 2009 Report Share Posted November 14, 2009 no prob bro.Ummmmm I would just glass over the gap, you can shove kitty hair in there first too. then sand smooth Ok thanks bro. System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
Hellbound Train Posted November 14, 2009 Report Share Posted November 14, 2009 The optimal is 32 hz for the BTL 12 so you would recommend 35 hz tuning? Link to comment Share on other sites More sharing options...
Ray Posted November 14, 2009 Author Report Share Posted November 14, 2009 The optimal is 32 hz for the BTL 12 so you would recommend 35 hz tuning? yep. 2.25-2.5 after with 45sqin of vent tuned to 34.5-35 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Hellbound Train Posted November 14, 2009 Report Share Posted November 14, 2009 So not 2.25-3? I look at the specs on the *** forum and it says 1.75-2.5 but the site says 1.75-3. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.