alaskanzx5 Posted February 17, 2014 Report Share Posted February 17, 2014 i don't see why the way you did it wont work but imo just for piece of mind I would wire it like the diagram kranny and sbg posted. better safe then sorry. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Exscathe Posted February 17, 2014 Author Report Share Posted February 17, 2014 How can you say going from positive to negative of coils is out of phase? Link to comment Share on other sites More sharing options...
Exscathe Posted February 17, 2014 Author Report Share Posted February 17, 2014 I am not rewiring to 4 ohms again, I am going to wire it to 1 ohm and keep it that way so I dont have to take out the drivers again, it is a pain in the ass. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted February 17, 2014 Report Share Posted February 17, 2014 well, then wire to 1ohm and be done with it. get upset all you want that people are trying to help and give you advice. doesn't effect any of us. 4 pages of suggestion and answers and seems like you haven't tried a single one of them. sorry but if your giving ideas and get upset about a suggestion people aren't going to want to help you very much. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
sbg Posted February 17, 2014 Report Share Posted February 17, 2014 I'm with alaskanzx5. You know it all but can't find your own problem so I'm done with this. 01 focus se 110 amp alt Big 3 sky high and stinger hpm ofc 1/0 Super start platinum AGM (starting) 2 runs of 1/0 Execution audio front to back Kenwood double DIN DDx271 A pillars- orion 4" super tweeter and 2-1" alpines. Orion xtx 64 in the front doors 2:1 4th order bandpass Sealed off trunk Digital designs deadener on roof/ rear deck Orion hcca 12s (black coils) Orion xtr3700.1 Orion xtr250.2 mid/highs All sky high 1/0 in trunk dual runs(power/ground) Sky high dual 1/0 inputs 2 xs power D3100 in back Sky high batt blocks Rose audio batt blocks Stinger volt meter All sky high 1\0 fuse and holders Db link remote/ rca Link to comment Share on other sites More sharing options...
SnowDrifter Posted February 17, 2014 Report Share Posted February 17, 2014 Swap the subs ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Guest Posted February 17, 2014 Report Share Posted February 17, 2014 your wiring is different than the picture I posted. you're not taking the free advice. take the fucking advice. you want help and you're not taking it Link to comment Share on other sites More sharing options...
Desousa93 Posted February 17, 2014 Report Share Posted February 17, 2014 double post New Build in the Making 1999 Infiniti I30 Limited if you break a rule and argue with n8 your going to get banned. suspended if your lucky. Link to comment Share on other sites More sharing options...
Desousa93 Posted February 17, 2014 Report Share Posted February 17, 2014 you're not taking the free advice. take the fucking advice. New Build in the Making 1999 Infiniti I30 Limited if you break a rule and argue with n8 your going to get banned. suspended if your lucky. Link to comment Share on other sites More sharing options...
Exscathe Posted February 17, 2014 Author Report Share Posted February 17, 2014 Your complaining on my post that I am not taking the advice given. If you know anything about wiring it does not matter what order you wire it in, take four diodes for example, put them in any order you want as long as polarity is right and they will work as intended. I did take advice given, sorry if I don't wanna change my series wiring to a different series wiring, it should not make a difference, use your head. I am upset my driver is acting like this, not that a few people are telling me to wire in series a different way.Total Advice Taken:- Meter the coils.- Pop Test.- Examine drivers to make sure polarity is the same.- Check wiring again.- Meter total load after wiring.This is axactly why people hate internet audio people, and Americans. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.