SnowDrifter Posted February 18, 2014 Report Posted February 18, 2014 New guy asks for help People suggest New guy doesn't want to check. Also find that information was left out People say to confirm as well as toss out a few new things New guy gets upset and calls names Argument ensues, original purpose of thread is lost. Same story agaaaiin OP your best bet is to stop making jabs at people. Just walk away and stop responding. Then maybe you won't get banned and can stick around for a while ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
n8ball2013 Posted February 18, 2014 Report Posted February 18, 2014 Well see when I suggested that, you didnt explain that variable did you? It wasn't until after. But thats ok. If I was wrong I'd say so. Are you familiar witht the term snowballing? And not the one where you swap cum with another person? The one that is used to brainstorm ideas? THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Exscathe Posted February 18, 2014 Author Report Posted February 18, 2014 Why would I want to stick around a community like this? Also I stated previously I could not do what people wanted me to because it was 10pm at night and I was not about to go into -20 celsius and rewire it like the series diagram and play it full blast to see if it made a difference. I did take multiple advice people gave me and I tried it.
thefourth Posted February 18, 2014 Report Posted February 18, 2014 Tread lightly man. Thanks alaskanzx5 I might just do thatI can recone a sub myself. About a year ago I took 2 12" power acoustic mofos and made one sub. I took the magnet and the motor off of one and j b welded it to the other motor and magnet. I had to wind my own voice coil so it would work. After I was done hooked up to 2 boss 5000w amps. And shattered my back and all my side windows came to this thread to recommend soundqubed and ct sounds. OP goes with soundstream. oh lawd.
Exscathe Posted February 18, 2014 Author Report Posted February 18, 2014 I didnt explain that variable because it did not occur that might be the issue until later, it was such a minor amount of time playing I ruled it out as one of the least possible things.
Exscathe Posted February 18, 2014 Author Report Posted February 18, 2014 Tread Lightly? On a community that repeated itself over and over about how the wiring was wrong, even after i drew a diagram, very few people, 1 or 2 actually seen that it was the same and the rest of the ignorant posters claimed I am out of phase and it has to be like the drawing, no other way.
Guest Posted February 18, 2014 Report Posted February 18, 2014 Why would I want to stick around a community like this? Also I stated previously I could not do what people wanted me to because it was 10pm at night and I was not about to go into -20 celsius and rewire it like the series diagram and play it full blast to see if it made a difference. I did take multiple advice people gave me and I tried it. why the hell didn't you tell us the temperature and time earlier?
fox_racin4 Posted February 18, 2014 Report Posted February 18, 2014 I pop test my subs on 12v all the time. Speakers as well.. Lol obvisoly you dont hold it on there for hours.. Just enough to make sure they are wired properly. If i ran a 16v system id use 16v. 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole
Exscathe Posted February 18, 2014 Author Report Posted February 18, 2014 Kranny are you in a different time zone? I figured it would not make a difference , and in some of my previous posts I mentioned the time however not the temperature. My bad there.
fox_racin4 Posted February 18, 2014 Report Posted February 18, 2014 Why would I want to stick around a community like this? Also I stated previously I could not do what people wanted me to because it was 10pm at night and I was not about to go into -20 celsius and rewire it like the series diagram and play it full blast to see if it made a difference. I did take multiple advice people gave me and I tried it. why the hell didn't you tell us the temperature and time earlier? Smrt. 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole
Recommended Posts
Archived
This topic is now archived and is closed to further replies.