Devon R Lining Posted July 3, 2014 Report Share Posted July 3, 2014 are we done discussing these yet..... cause i dont wanna be done Link to comment Share on other sites More sharing options...
youngbass98 Posted July 3, 2014 Report Share Posted July 3, 2014 from 5 months ago I think we're done 06 monte carlo 2 12 rockford p3s soundstream rubicon 2500 crescendo audio mezzo 6.5 ct sounds 125.4 execution audio and shca wiring 2 xs d3400 on stock alt Link to comment Share on other sites More sharing options...
Devon R Lining Posted July 4, 2014 Report Share Posted July 4, 2014 Link to comment Share on other sites More sharing options...
CJ18 Posted July 4, 2014 Author Report Share Posted July 4, 2014 What would you like to discuss? Good amp for a good price. Link to comment Share on other sites More sharing options...
tdsa23 Posted July 11, 2014 Report Share Posted July 11, 2014 The one thing I don't like about these, is the angled set screws. They pretty much rip the wire apart. Instead of going straight down into the wire, it goes in, and acts like a cutter almost. I've had to remove the speaker wire a couple times now for DD1 / CC1 action, and if I do it again, I'm going to have to cut the wire and re strip it. Otherwise I love mine! They're solid. I beat on my mids yesterday on the way home, about 45 minute drive, and when I got home they were just warm. Not hot, but warm. I think nendo hit one out of the park with these things! Probably not going to do anything for the speaker wire side, but I think we are going to offer free 1/0 to 1/0 with the 1500.1 and 4ga to 4ga with the other 3. Will have to have them designed and made to fit the angled set screw though.I look at it this way, I dont mind the angled set screw, it would piss me off if the whole input were angled. I hate those. Are you offering free1/0 inputs with the amps? XS Power D5100, 2 D2700s, & 2 D975s MechMan 220a Alt DC 5K Kicker 650.4 2 12 Ascendant Audio Mayhem's Pioneer DEH-P7200HD Rockford Fosgate 3sity.1 Build log: https://www.stevemeadedesigns.com/board/topic/166792-88-nissan-maxima-trunk-build/#entry2430899 https://www.stevemeadedesigns.com/board/topic/191439-lexus-is300-fi-crescendo-shca-rf-pics/ Link to comment Share on other sites More sharing options...
sps Posted July 16, 2014 Report Share Posted July 16, 2014 Hey guys, I recently bought this amp and I'm running 2 gauge wire to it to powera pioneer champion pro 10 inch with it but don't seem to be getting as much power as I should be. The sub isdual 4 ohm coils. I even plugged in an old 12 inch premier that only needs 400rms and I could only over power it when the volume was cranked. My head unit is an alpine ute-42Bt and I'm running 4 kicker ks65 from it, could the problem be the head unit? Any advice would help! (First posting in any forum ever so hopefully its in the proper section) Thanks Link to comment Share on other sites More sharing options...
bigsausagepizza Posted January 8, 2015 Report Share Posted January 8, 2015 So I just read something that answers part of the efficiency question. The 90%+ rating is at 2 ohm on the 1500.1 and 4 ohm on the 600.1 Per Crescendos Website The final outcome of the PCB design enables up to 97% efficiency @ 2 ohms on the monoblock Symphony models and up to 91% efficiency @ 2ohms per channel on the multi-channel models, making them the top tier of efficiency possible in car audio. Did you ever run this test? I'd like to get this amp and might run at 2 ohms to avoid drawing too much from my electrical. In another thread people were saying there is no way it is close to 97%, I'd love to prove them wrong. Crescendo seems like a pretty reputable brand, hard to believe they would wildly overstate efficiency when all the other specs check out. 2008 Subaru WRX STI K&N Typhoon Intake Invidia Polished Stainless 3" turbo back with cat Cobb Accessport Dyno tune from Kaizen Tuning 320awhp 330ft-lb awtq MTX 421D Sub amp American Bass SQ900 Highs/Mids amp Sundown Audio SD-2 10 D4 JL Audio XR653-CS 3-way Components 3sixty.2 Second Skin Damplifier Pro Custom fiberglass wheel well enclosure Transmission Line quasi-floor enclosure http://www.stevemeadedesigns.com/board/forum/13-member-rides-builds-show-off-your-whip-show-off-your-system/ Bill Fitzmaurice TLAH line-array hifi towers 9 Goldwood 4" mids (each) 12 Goldwood 1/2" tweeters (each) NAD 1020 Preamp MiniDSP 2x4 Balanced processor Thorens TD166mkII Turntable Hafler DH-200 Amplifier http://www.stevemeadedesigns.com/board/topic/192638-line-array-hifi-tower-build/ https://www.facebook.com/HolyMountainGlass Link to comment Share on other sites More sharing options...
GorillaFIngeRs Posted January 5, 2018 Report Share Posted January 5, 2018 anyone ran this amp at .5 ohms? AQ3500.115" Fi SP41/0 Knuconceptz Power/Ground 1/0 Sky High Big 3 UpgradePioneer AVH-4200NEXXS Power D1200 Underhood Intimidator Gel In Trunk CES 250A Alternator Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.