anybody have any ideas for a dual ported sub enclosure for 2 RF t1 12"

[m720bos]

I just upgraded from 2 RF p3 subs to 2 RF T! 12" subs and have been looking at box design ideas. Does anybody have any recommendations? It would preferably be ported and will be going into a 99 Grand Cherokee.

[FUKAZ28]

Post the area measurements you have to work with and I'm sure you will get what you need.

[load350z]

If I lived close to you I would sell u mines. Or if shipping wasn't so expensive from hawaii. What kinda power you running

[jarrius]

Please Post Max LxWxH you want to use and what you would like the tuning to. With that info give it a couple days and some one should be able to help you. Its easy and cheap to build a box^_^

[m720bos]

it can be anywhere around 4ft. wide and 4 ft long and height about 2 1/2 ft. I have plenty of space like i said its going into the back of a jeep grand cherokee. Im really just looking for some ideas of designs and the best dimensions to use. I have looked on the RF box advisor and have already gotten some kind of idea of what they recommend, but I have seen some pretty cool box ideas here before so I figured i would ask. I would most likely want it to be tuned between 34-40 hz

[m720bos]

I have 2 RF T500-1bd amps one for each sub

[m720bos]

I was gonna be lazy and have my local custom sound shop build it for me, but then they told me it would be about $400 so I decided that I would save $300 and do it myself.

[Karkov]

I was gonna be lazy and have my local custom sound shop build it for me, but then they told me it would be about $400 so I decided that I would save $300 and do it myself.

Not only that but I think it is fun as hell to build boxes. I suck at designing them and won't even touch that aspect of it but building them is pure sex

[mnrookie]

What type of music do you listen to?

[bcbrassard]

Did you get the T!D212s or T1D412s. I have a T1D212 in 1 ohm mode off a T1500 @ 1950 watts, a bit over powered but i am careful with the settings, Gains set with DD-1 on SQ track. I have to rebuild box due to tuned @ 47hz. It was my first box and screwed up on the math. Next box will be 2 12s but thinking Fi Qs. But good subs and will sound good in a SUV in the right enclosure and power. Just take your time and do research before you build. Lots of great help here on SMD. Here a pic of where i went wrong. LOL I just want people to learn from mistakes i have made. But on the bright side i can build better and louder now.